Whirlpool ET16XK manual Ice cube trays, To remove ice Hold tray at both ends Twist slightly

Page 8

U& nr$ Refrigerator

B

Changlng the light bulb

Before removlng a light bulb, either unplug the refrigerator or dlaconnect the electrl~ tty leading to the refrigerator at the maln

To change refrigerator Ilght:

1. Disconnect refrigerator from power supply.

2. Reach behind control console to find bulb.

3. Remove bulb and replace with a 40-watt appliance bulb.

4. Reconnect refrigerator to power supply. NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace bulb with one of the same size and shape.

Reversing the door swlng

You can change the hinges on your refrigerator so the doors open the other way. Refer to the instruction sheet included with your refrigerator.

Ice cube trays

lf cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The bnger cubes are stored, the smaller they get.

To remove ice:

1. Hold tray at both ends.

2. Twist slightly.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Use& CareGuide W4aif1Contents ImportantSafetyInstructions BeforeUsingYourRefrigerator Install properlyUsingYourRefrigerator Paw Adjust the Refrigerator Control firstIf ICE isn’t Are TOO WarmUsln Your Refrigerator Bnued Pull oul to the stop, Ilfl nm front and Pull qpln Ice cube trays To remove ice Hold tray at both ends Twist slightlySlgnsl arm to stop lm CapacityThud clatter of ice CleaningYourRefrigerator Condenser tolls Floor under refrigeratorMitd detergent Warm water MonthFoodStorageGuide Do not use Bread wrappersCaringForYourRefrigerator Short vacationsLf.YouNeedServiceOrAssistance RememberIt you prefer, write to Mr. William Clark HIClWCMAPPUNUB IEP---- sERwcELREPuA NUOR-REPURNGLPMTSIf you need FSP replacement parts’ ApplianceWHIRLPOOLRefrigeratorWarranty Authorized Whirlpoola service companyFrom Date of Purchase Whirlpool Corporation
Top Page Image Contents