1. Introduction
Welcome to the future of personal digital imaging. Digital Spectrum is “Bringing Your Digital Lifestyle Into View”. MemoryFrameTM combines the vibrant
The Digital Spectrum MemoryFrame is designed to download and display pictures from many USB sources such as:
Card Readers | Internet Photo Sharing |
Thumb Drives | Ethernet Network |
DVD/CD Drives | Camera |
Wireless Network | PC |
By using the DirectConnectTM feature of the MemoryFrame you can download digital photos directly from your camera, card reader, or thumb drive and play them back in a
MemoryFrame stores 80 photos and allows you to select how long each image is displayed and what style of transition is used between each image! With
MemoryFrame is perfect as a gift for family, friends, or even as a lobby piece in a business. Imagine preloading the MemoryFrame with those “just perfect” photos, and sending it as a personal gift. It would leave an impression long after the gift is opened.
program in the new firmware image. You must wait up to three (3) minutes for the frame to complete the software upgrade.
Important! Do not unplug or cut power to the MemoryFrame or PC during the upgrade process! A loss of power could erase both old and new operating systems, leaving the MemoryFrame inoperable.
The MemoryFrame will display the following sequence of messages to show the progress of the firmware update:
“FLASH BEING ERASED” “FLASH BEING LOADED” “READING FLASH” “VERIFYING FLASH”
If an error occurs in the above process (either erasing, loading, or verification), the MemoryFrame will display the following message:
“REDO FLASH- DON’T POWER OFF (error code number)”
Caution! Important! Do not unplug or cut power to the MemoryFrame or PC. The above error message indicates that there was an error (either erase, loading, or verification) during the firmware update. The firmware update MUST BE retried, and the PICTURE FRAME MUST NOT BE POWERED OFF BEFORE THAT during the upgrade process! A loss of power could erase both old and new operating systems, leaving the MemoryFrame inoperable.
If no errors occur, then once the new firmware update file has been loaded into the MemoryFrame’s storage memory, the MemoryFrame will indicate it is done by displaying the following message indicating when you can reset the MemoryFrame:
“PLEASE POWER THE
Only then can you turn the MemoryFrame OFF, and then turn it back ON. When the MemoryFrame goes into normal operation, the upgrade has been completed. The new Firmware revision will be displayed in the lower right hand corner of the MemoryFrame’s
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 1 |
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 55 |