Figure 23 – Revert Back to Internal Slideshow
11.5.1 Replace Slideshow
The MemoryFrame will search the USB device for a Digital PixMaster compatible slideshow (.pd2 extension). If a slideshow is found, it is uploaded and stored to the onboard permanent memory, replacing the existing slideshow. The screen will present a progress bar while the uploading and storing process is underway. When complete, the new slideshow will begin to play. Once the new slideshow begins playing, it is safe to remove the USB device. DO NOT REMOVE THE USB DEVICE WHILE THE MemoryFrame IS UPLOADING FROM THE DEVICE.
11.5.2 Play Slideshow
The MemoryFrame will search the USB device for a Digital PixMaster compatible slideshow (.pd2 extension). If a slideshow is found, the MemoryFrame will play the slideshow directly from the USB device. To revert to the internal slideshow, depress the Menu button. Select the “Resume Memory Slideshow” function. The MemoryFrame will then ignore the USB device and play the slideshow stored in internal memory. The slideshow already stored in the MemoryFrame will not be disturbed when a “Play Images from USB Port” is performed. Note: DO NOT REMOVE THE USB DEVICE WHILE THE MemoryFrame IS PLAYING FROM THE DEVICE. Use the Menu Button.
6.18Attach Audio Clip
For each image you can associate a WAV audio file that will play when the slide is displayed (WAV is the common term used for uncompressed audio, because the file extension is “.wav”). The addition of audio adds an extra dimension to slideshows by allowing annotation for each image with either voice or music, enabling narrative shows or storybooks. Use the ► button to preview (listen to) the audio clip. Be aware that when an audio clip is attached to an image, the display time will be the longer of either the display time setting or the duration of the audio clip. Also note that the more audio clips that are attached to a slideshow, the fewer the number of total images can be in the slideshow. See Figure 13.
Figure 13 – Attach Audio Clip
6.19Preview Slideshow
You can preview how the slideshow will appear before sending. Selecting “Preview Slideshow” from the View menu will present the slideshow in a window using the selected transition and timing selections as shown below. This function is also available by clicking on
icon (
) in the toolbar.
◄ = Previous Slide ► = Next slide = Pause ► = Play
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 36 |
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 17 |
