The Configuration Welcome screen appears as shown in Figure 16. Information displayed includes the current Unit Name and Serial Number. Click “Next” to the Set Unit Name screen.
apply this Time to either “Only This Image” or “All Images”. See Figure 20.
Figure 16 – Configuration Wizard Welcome Screen
The Set Unit Name Screen is used to give the MemoryFrame a friendly name. This is because you may own a number of frames and want to easily identify each one, such as Living Room, Den, Fireplace, etc. Simply type in the name as you see fit, as long as the number of characters is 32 or less. You may use special characters such as ~!>?”, etc. Click “Next” to advance to Set Network Address, “Cancel” to abort, or “Finish” to store and exit. See Figure 17.
Figure 17 – Set Unit Name
Figure 20 – Slide Duration
11.4.3 Set Background (Fill) Color
The MemoryFrame will fill any unused portion of the screen with a background of your choice from the list of colors. This reduces the “black bar” effect seen when images do not have the same 4:3 proportion as the MemoryFrame screen/ Once selected you are given the choice to apply this Color to either “Only This Image” or “All
Images”.
11.4.4 Delete Slide
The Delete Slide option allows you to delete a particular image from the MemoryFrame’s memory. Highlight the thumbnail of the image to be deleted then push the Select button.
11.4.5 Rotate 90º
The images may have been taken with the camera in either horizontal or vertical position. The Rotate 90º option allows you to set the proper orientation to display any particular image. When you select Rotate 90º, the MemoryFrame will rotate the currently selected image 90º to the right. First select the thumbnail image you wish to rotate and then push the Pause/Select button as necessary to rotate the image to the desired orientation. This will save the change into memory and then return to thumbnail navigation mode.
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 20 |
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 33 |
