established for your network. When the WEP Keys are set, click “OK”, and then click “Next” to advance to Register Your Frame, “Cancel” to abort, or “Finish” to store and exit. See Figure 20 and 21.
Figure 20 – Set Wireless Info
Figure 21 – Set WEP Keys
Some items in the main menu execute the listed task, while other items in the main menu launch a
11.3Resume Slideshow
When you wish to exit the Menu system, you can either push the Menu button again or alternatively use the appropriate button [Forward (►) or Reverse (◄)] to highlight the Resume Slideshow menu selection and then press the Select button. This will resume the slideshow from the last image that was displayed before entering the Menu system.
11.4Configure Slides
This menu lets you set or change the attributes of each image in a slideshow without a PC. To enter a Configure Slides
Important! On any menu that has thumbnail images, the thumbnails will take a few moments to appear, and you will be unable to select an image or move the highlight until ALL of the thumbnails have appeared in their entirety.
Figure 18- Configure Slides Menu
In this menu, you are first presented with a thumbnail view of five (5) of many images stored in the MemoryFrame. You can navigate through the images using the Forward (►) and Reverse (◄) buttons. Since the MemoryFrame can hold up to 80 images, this display of three (5) thumbnails serves as a
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 22 |
Copyright© 2006 Digital Spectrum Solutions, Inc. | Page 31 |
