Whirlpool ET1MHKXM LocationRequirements, Electrical Requirements, Water Supply Requirements

Page 3

LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a ½" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on the hinge side (some models require more) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install the refrigerator in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method LocationRequirementsElectrical Requirements Water Supply RequirementsConnect to Water Line Connect the Water SupplyWater Pressure Reverse Osmosis Water SupplyFreezer door Refrigerator DoorsReverse Doors-Standard Door optional CabinetRefrigerator door Reverse Doors-Contour Door optionalReplace Doors and Hinges all models Final Steps all modelsOptional Adjust the Doors Using theControlsRefrigerator USE Ice Maker CleaningRefrigerator Care Crisper Humidity ControlTroubleshooting Changing the Light BulbsRefrigerator Operation Accessories Temperature and MoistureIce and Water Disclaimer of Implied Warranties Limitation of Remedies Limited WarrantyItems Excluded from Warranty This limited warranty does not coverRéfrigérateur Sécurité DU RéfrigérateurRetirer les matériaux d’emballage Instructions DinstallationExigences demplacement Déballagedu réfrigérateurSpécificationsélectriques Spécifications del’alimentationen eauRaccordement de la canalisation deau Raccordement au réfrigérateur Achever l’installationPorte du compartiment de congélation Portes du réfrigérateurDémontage Portes et charnières tous les modèles CaissePortes Réinstallation Portes et charnières tous les modèlesÉtapes finales tous les modèles Porte du réfrigérateurPorte incurvée Inversion du sens Utilisation des commandes Utilisation DU RéfrigérateurAjustement desportes Entretien DU Réfrigérateur Machine à glaçonsNettoyage Remplacement des ampoules d’éclairage DépannageFonctionnement du réfrigérateur Accessoires Température et humiditéGlaçons et eau W10131409A SP PN W10131417A Garantie LimitéeArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pas

ET1MHKXM specifications

The Whirlpool ET1MHKXM is a top-mounted refrigerator designed to blend functionality with style, making it a popular choice for modern kitchens. With its sleek design and efficient operation, it addresses the needs of families seeking reliable food storage solutions.

One of the standout features of the ET1MHKXM is its spacious interior, which allows for ample storage of groceries and other perishables. The refrigerator section offers adjustable shelves that provide flexibility to accommodate taller items. Additionally, the humidity-controlled crisper drawers ensure that fruits and vegetables maintain their freshness for an extended period. This is a key feature that many users appreciate, as it helps reduce food waste and keeps produce crisp.

Furthermore, the ET1MHKXM comes with the adaptive defrost feature which enhances energy efficiency. This technology monitors the frost buildup in the freezer and activates the defrost cycle only when necessary, thereby saving energy and ensuring optimal performance. The ENERGY STAR certification also reflects its energy-efficient design, making it a cost-effective appliance for consumers.

Another significant characteristic of the Whirlpool ET1MHKXM is its adjustable door bins, which provide convenience for storing a variety of condiments and small items. This feature allows users to customize the door space according to their preferences, facilitating easy access to frequently used items.

The sleek exterior is available in multiple finishes, allowing consumers to choose a look that best fits their kitchen décor. The exterior also features a fingerprint-resistant finish, making it easier to keep the surface clean and maintaining its aesthetic quality over time.

In terms of cooling technology, the refrigerator uses a reliable cooling system that maintains a consistent temperature throughout all compartments. This ensures that food remains at optimal temperatures, prolonging its shelf life.

Overall, the Whirlpool ET1MHKXM combines thoughtful design with practical technology, making it a reliable choice for those in need of a versatile and efficient refrigerator. Its combination of spacious storage, energy-saving features, and modern aesthetics makes it an excellent addition to any home.
Top Page Image Contents