Whirlpool ET1MHKXM Reverse Doors-Contour Door optional, Replace Doors and Hinges all models

Page 6

Refrigerator door

1.Remove refrigerator handle bottom trim. For Style 1, remove the handle screw cover. See Graphic 6-1. For Style 2, slide trim down as shown in Graphic 6-2.

2.Remove the refrigerator handle assembly as shown. Keep all parts together. See Graphic 6-3.

3.Remove the door hinge hole plug from refrigerator door. Move it to the opposite side hinge hole as shown in Graphic 3.

4.Remove the door handle sealing screws. Move them to the opposite side of the refrigerator door as shown in Graphic 4.

5.Remove the door handle seal screw front. Move it to the opposite side of the refrigerator door as shown in Graphic 7.

6.Remove the door stop. Move it to the opposite side of the refrigerator door as shown in Graphic 5.

7.Position the refrigerator handle on opposite side of the refrigerator door as shown in Graphic 6-3. Drive the two top screws in the handle first. Align the lower portion of the handle and drive the bottom screw.

8.Align refrigerator bottom trim. For Style 1, replace the door handle screw cover. See Graphic 6-1. For Style 2, slide trim into place. See Graphic 6-2.

9.Tighten all screws. Set aside refrigerator door until bottom hinge is installed on product.

Reverse Doors–Contour Door (optional)

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

Cabinet

1.Remove the ⁵⁄₁₆" hex-head hinge screws from handle side and move them to the opposite side. See Graphic 1-1.

2.Remove the cabinet hinge hole plugs from the cabinet top and move them to the opposite side hinge holes as shown in Graphic 1-2.

Doors

1.Remove the door stops from both the freezer and the refrigerator doors and move them to the opposite side. See Graphic 5.

Replace Doors and Hinges (all models)

NOTE: Graphic may be reversed if door swing is reversed.

1.Replace the parts for the bottom hinge as shown and tighten screws. See Bottom Hinge graphic. Replace the refrigerator door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

2.Assemble the parts for the center hinge as shown and tighten all screws. See Center Hinge graphic. Replace the freezer door.

3.Assemble the parts of the top hinge as shown in the Top Hinge graphic. Do not tighten the screws completely.

4.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.

Final Steps (all models)

1.Check all the holes to make sure that hole plugs and screws are in place. Reinstall the top hinge cover as shown in the Top Hinge graphic.

2.Replace the base grille. See Base Grille graphic.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

3.Plug into a grounded 3 prong outlet.

4.Reset the controls. See “Using the Control(s).”

5.Return all removable door parts to doors and food to refrigerator.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Before You Throw Away Your Old Refrigerator or FreezerWater Supply Requirements LocationRequirementsElectrical Requirements Recommended Grounding MethodReverse Osmosis Water Supply Connect the Water SupplyWater Pressure Connect to Water LineCabinet Refrigerator DoorsReverse Doors-Standard Door optional Freezer doorFinal Steps all models Reverse Doors-Contour Door optionalReplace Doors and Hinges all models Refrigerator doorOptional Adjust the Doors Using theControlsRefrigerator USE Crisper Humidity Control CleaningRefrigerator Care Ice MakerTroubleshooting Changing the Light BulbsRefrigerator Operation Accessories Temperature and MoistureIce and Water This limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of RemediesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Retirer les matériaux d’emballageSpécificationsélectriques Spécifications del’alimentationen eauRaccordement de la canalisation deau Achever l’installation Raccordement au réfrigérateurCaisse Portes du réfrigérateurDémontage Portes et charnières tous les modèles Porte du compartiment de congélationPorte du réfrigérateur Réinstallation Portes et charnières tous les modèlesÉtapes finales tous les modèles PortesPorte incurvée Inversion du sens Utilisation des commandes Utilisation DU RéfrigérateurAjustement desportes Entretien DU Réfrigérateur Machine à glaçonsNettoyage Remplacement des ampoules d’éclairage DépannageFonctionnement du réfrigérateur Accessoires Température et humiditéGlaçons et eau La présente garantie limitée ne couvre pas Garantie LimitéeArticles Exclus DE LA Garantie W10131409A SP PN W10131417A

ET1MHKXM specifications

The Whirlpool ET1MHKXM is a top-mounted refrigerator designed to blend functionality with style, making it a popular choice for modern kitchens. With its sleek design and efficient operation, it addresses the needs of families seeking reliable food storage solutions.

One of the standout features of the ET1MHKXM is its spacious interior, which allows for ample storage of groceries and other perishables. The refrigerator section offers adjustable shelves that provide flexibility to accommodate taller items. Additionally, the humidity-controlled crisper drawers ensure that fruits and vegetables maintain their freshness for an extended period. This is a key feature that many users appreciate, as it helps reduce food waste and keeps produce crisp.

Furthermore, the ET1MHKXM comes with the adaptive defrost feature which enhances energy efficiency. This technology monitors the frost buildup in the freezer and activates the defrost cycle only when necessary, thereby saving energy and ensuring optimal performance. The ENERGY STAR certification also reflects its energy-efficient design, making it a cost-effective appliance for consumers.

Another significant characteristic of the Whirlpool ET1MHKXM is its adjustable door bins, which provide convenience for storing a variety of condiments and small items. This feature allows users to customize the door space according to their preferences, facilitating easy access to frequently used items.

The sleek exterior is available in multiple finishes, allowing consumers to choose a look that best fits their kitchen décor. The exterior also features a fingerprint-resistant finish, making it easier to keep the surface clean and maintaining its aesthetic quality over time.

In terms of cooling technology, the refrigerator uses a reliable cooling system that maintains a consistent temperature throughout all compartments. This ensures that food remains at optimal temperatures, prolonging its shelf life.

Overall, the Whirlpool ET1MHKXM combines thoughtful design with practical technology, making it a reliable choice for those in need of a versatile and efficient refrigerator. Its combination of spacious storage, energy-saving features, and modern aesthetics makes it an excellent addition to any home.
Top Page Image Contents