Whirlpool ET25DM warranty Leveling it

Page 6

Leveling it

Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below.

1.Remove base grille. (See page 13.)

2.To raise front, turn screw clockwise.

3.To lower front, turn screw counterclockwise.

4.Check with level.

5.Replace base grille. (See page 13.)

Front roller

Right to raise; left to lower

Use a screwdriver

Image 6

Contents Fl of 4a UseAndCare Your safety is important to us Thank you for buying a Whirlpool applianceImportant Safety Instructions Help us help youParts And Features Control panelInstalling it properly Before Using Your RefrigeratorCleaning it Plugging itLeveling it Temperature controls Using Your RefrigeratorSetting the controls This Section Pa*PageSettings Adjusting the door binsChanging the control Adjusting the bin/shelf glides Adjusting the refrigerator shelvesRemoving the meat drawer and cover Adjusting the crisper humidity control Removing the crispers and crisper coverUsing the ice cube trays ETZ~DKI Removing the freezer shelfRaising the ice compartment door Using the automatic ice maker Factory-installed on ET25DM, optional on ET25DKChanging the light bulbs Removing the base grilleReversing the door swing Understanding the sounds you may hearSaving energy Cleaning your refrigerator Caring For Your RefrigeratorThis Section PagePage Long vacations Vacation and movingCare Short vacationsPower interruptions Food Storage GuideStoring fresh food Storing frozen food Freezer food storage chart FoodStorage Time Solution If You Need Assistance Or ServiceProblem Before calling for assistanceIf you need assistance If you need serviceIf vou are not satisfied with ho-w the problem was solved If you need FSP replace- ment partsPage Page Full FIVE-YEAR Length of WarrantyWill PAY for Full ONE-YEAR Warranty Whirlpool will not PAY for