Whirlpool ET25DM Removing the crispers and crisper cover, Adjusting the crisper humidity control

Page 10

Removing the crispers and crisper cover

To

remove

the crispers:

Pull out to

the

stop,

1. Slide the crisper straight out to the stop.

lift

the

front

and pull

again.

2.

Lift the

front.

 

 

 

3. Slide out the rest of the way.

 

 

 

4.

Replace

in reverse order.

 

 

 

To remove the cover:

1.Push up glass insert from the bottom, then slide it out with both hands.

2.Lift front of cover frame.

3.Pull cover frame up and out.

4.Remove metal cover support.

To replace the cover:

1.Replace metal cover support on wall supports in front section of cabinet.

2.Fit back corner of cover frame into notch supports on walls of refrigerator, then lower front onto metal cover support.

3.Slide back of glass insert into cover frame. Then lower front to level position.

Remove the glass insert Lift front of cover frame, then the back.

Adjusting the crisper humidity control

You can control the amount of humidity in the moisture-sealed crispers.

l The control can be adjusted to any setting between LOW and HIGH.

lLOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.

l HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.

10

Image 10
Contents Fl of 4a UseAndCare Your safety is important to us Thank you for buying a Whirlpool applianceImportant Safety Instructions Help us help youParts And Features Control panelInstalling it properly Before Using Your RefrigeratorCleaning it Plugging itLeveling it Temperature controls Using Your RefrigeratorSetting the controls This Section Pa*PageAdjusting the door bins SettingsChanging the control Adjusting the refrigerator shelves Adjusting the bin/shelf glidesRemoving the meat drawer and cover Adjusting the crisper humidity control Removing the crispers and crisper coverRemoving the freezer shelf Using the ice cube trays ETZ~DKIRaising the ice compartment door Using the automatic ice maker Factory-installed on ET25DM, optional on ET25DKChanging the light bulbs Removing the base grilleUnderstanding the sounds you may hear Reversing the door swingSaving energy Caring For Your Refrigerator Cleaning your refrigeratorThis Section PagePage Long vacations Vacation and movingCare Short vacationsFood Storage Guide Power interruptionsStoring fresh food Storing frozen food Food Freezer food storage chartStorage Time Solution If You Need Assistance Or ServiceProblem Before calling for assistanceIf you need assistance If you need serviceIf vou are not satisfied with ho-w the problem was solved If you need FSP replace- ment partsPage Page Full FIVE-YEAR Length of WarrantyWill PAY for Full ONE-YEAR Warranty Whirlpool will not PAY for