Whirlpool GR2FHMXV Refrigerator Doors, Connect to Refrigerator, Complete the Installation

Page 5

Connect to Refrigerator

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

 

A

 

B

 

C

 

D

 

E

A. Tube clamp

D. Compression nut

B. Tube clamp screw

E. Valve inlet

C. Copper tubing

 

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

All graphics referenced in the following instructions are included later in this section after “Final Steps.” The graphics shown are for a right-hand swing refrigerator (hinges factory installed on the right).

If you only want to remove and replace the doors, see “Remove Doors and Hinges” and “Replace Doors and Hinges.”

Depending on your model, you may have standard (Style 1) or contour (Style 2) doors. If you are going to reverse the door swing, follow the instructions for the appropriate door style.

Before you begin, turn the refrigerator control OFF, and remove food and adjustable door or utility bins from doors.

Remove Doors and Hinges (all models)

⁵⁄₁₆'' Hex-Head Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Open refrigerator door and remove base grille from the bottom front of the refrigerator. See Base Grille graphic.

3.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Reverse Doors–Standard Door (optional)

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw

Cabinet Hinge Hole Plug

Flat-Head Handle Screw

Door Handle Screw Cover

Door Handle Seal Screw Front

Round-Head Handle Screw

Cabinet

1.Remove ⁵⁄₁₆" hex-head hinge screws from the handle side and move them to the opposite side. See Graphic 1-1.

2.Remove the cabinet hinge hole plugs from the cabinet top and move them to the opposite side hinge holes as shown in Graphic 1-2.

5

Image 5
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerRecommended Grounding Method LocationRequirementsElectrical Requirements Connect the Water Supply Water Supply RequirementsWater Pressure Reverse Osmosis Water SupplyRefrigerator Doors Complete the InstallationConnect to Refrigerator Remove Doors and Hinges all modelsFinal Steps all models Reverse Doors-Contour Door optionalReplace Doors and Hinges all models Optional Refrigerator USE Adjust the DoorsUsing theControls Refrigerator Care CleaningCrisper Humidity Control Ice MakerRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water AccessoriesTemperature and Moisture Items Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied WarrantiesEL Usuario DEL Refrigerador Seguridad DEL RefrigeradorDesempaque el refrigerador Instrucciones DE InstalaciónRequisitos de ubicación Quite los materiales de empaqueRequisitos del suministro de agua Requisitos eléctricosMétodo de conexión a tierra recomendado Presión del aguaConexión a la línea de agua Conexión del suministro de aguaConexión al refrigerador Cómo terminar la instalaciónCómo quitar las puertas y las bisagras todos los modelos Puertas del refrigeradorCarcasa Puerta del congeladorPuertas Pasos finales todos los modelosCambio del sentido De apertura de las Puertas Puerta Ajuste las puertas USO DE SU RefrigeradorUso de los controles Cierre de la puertaFábrica dehielo Control dehumedad del cajón para verduras enalgunos modelosLimpieza Cuidado DE SU RefrigeradorCómo cambiar los focos Para limpiar su refrigeradorFuncionamiento delrefrigerador Solución DE ProblemasHielo y agua AccesoriosTemperatura y humedad Exclusiones DE LA Garantía Garantía LimitadaEsta garantía limitada no cubre Exclusión DE Garantías ImplícitasRéfrigérateur Sécurité DU RéfrigérateurExigences demplacement Instructions DinstallationDéballagedu réfrigérateur Retirer les matériaux d’emballageSpécificationsélectriques Méthode recommandée de mise à la terreSpécifications del’alimentationen eau Pression de leauRaccordement de la canalisation deau Achever l’installationRaccordement à une canalisation d’eau Raccordement au réfrigérateurDémontage Portes et charnières tous les modèles Portes du réfrigérateurCaisse Porte du compartiment de congélationPortes Réinstallation Portes et charnières tous les modèlesÉtapes finales tous les modèles Facultatif Utilisation DU Réfrigérateur Utilisationdes commandesAjustement des portes Fermeture des portesRéglage de lhumidité dansle bac à légumes Ajustement des commandesMachine à glaçons Mise en marche/arrêt de la machine à glaçonsEntretien DU Réfrigérateur Remplacementdes ampoules d’éclairageNettoyage Nettoyage de votre réfrigérateurFonctionnement du réfrigérateur DépannageTempérature et humidité AccessoiresGlaçons et eau Les glaçons sont creux ou petitsÉléments Exclus DE LA Garantie Garantie LimitéeLa présente garantie limitée ne couvre pas W10208839A EN/FR PN W10208840A

GR2FHMXV specifications

The Whirlpool GR2FHMXV is a state-of-the-art refrigerator designed to enhance kitchen functionality while providing a stylish aesthetic. This model is part of Whirlpool's broader commitment to innovative appliances that make life easier and more efficient for homeowners. With its impressive array of features and cutting-edge technologies, it stands out as a reliable choice for modern households.

One of the standout features of the Whirlpool GR2FHMXV is its spacious interior, which includes adjustable shelves and door bins specifically designed to maximize storage space. This flexibility allows users to rearrange the interior layout to accommodate a variety of food items, from tall bottles to small containers. Additionally, the refrigerator includes dedicated compartments for fruits and vegetables, ensuring optimal storage conditions that help keep produce fresh longer.

The refrigerator is equipped with advanced cooling technologies, such as Even Cooling and Adaptive Defrost. The Even Cooling technology ensures that cold air is distributed evenly throughout the fridge, preventing hotspots and ensuring that food remains at a consistent temperature. Adaptive Defrost, on the other hand, senses when defrosting is necessary and runs cycles only as needed, which helps in saving energy and reducing wastage.

For those concerned about food preservation, the Whirlpool GR2FHMXV incorporates an advanced filtration system that ensures the water and ice dispensed are clean and free from contaminants. This feature is particularly valuable for families who prefer drinking filtered water or using ice for beverages.

Another noteworthy aspect of this refrigerator is its energy efficiency. With an energy-saving mode and innovative insulation designs, the GR2FHMXV is designed to consume less power, which not only benefits the environment but also reduces electricity bills over time.

The sleek exterior of the Whirlpool GR2FHMXV adds a contemporary feel to any kitchen, and its stainless steel finish is both attractive and easy to clean. The intuitive control panel makes it easy for users to adjust temperature settings, manage energy-saving modes, and monitor the fridge’s performance.

In conclusion, the Whirlpool GR2FHMXV combines style, functionality, and efficiency. With its sophisticated cooling technologies, ample storage options, and commitment to energy conservation, this refrigerator is a smart investment for anyone looking to upgrade their kitchen. Whether preserving fresh produce or keeping drinks chilled, it delivers on all fronts, making it an essential addition to any modern home.