Using your refrigerator
I
| FREEZE |
EXTERIOR MOWUKE~ | *WARMER . ( |
Refrigerator | Control | / | Llg ht Switch | Freezer Control |
|
|
|
| |
|
| Power Saving | Control |
|
Setting the controls.. .
Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time...
1, Set the REFRIGERA- TOR CONTROL to 3.
2.Set the FREEZER CONTROL to B.
Glve the retrlgerator tlme to cool down com- pletely betore adding tood. (This may take sev-
eral hours.]
These settlngs should be about right for normal household retrlgerator usage.
The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.
Changing the control settings.. .
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.
CONDITION. | : _, | J?EASONS: |
|
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control, if needed.
RECOMMENDED CONTROL
SETTINGS:
| If Refrigerator | ||
| Section | is | |
| TOO WARM | ||
| ” _. | ||
| If Freezer | ||
| Section | is | |
| TOO WARM | ||
GUESQUESTIONS? |
| ||
...call | If Refrigerator | ||
...call your | |||
service | TOO COLD | ||
Cccir+nnpfi | , | ||
..- | |||
assistance | If ICE isn’t | ||
tctelephone | |||
number | MADE FAST ENOUGH | ||
j | |||
(page15). | |||
| If BOTH SECTIONS | ||
| are TOO WARM | ||
Door opened often
Large amount of food added Room temperature toa warm
Door opened of ten
Large amount of food added Very cold room temperature
Controls not set correctly for your conditions
Heavy ice usage
Very cold room temperature
Jcan’t cycle often enough]
Large amount of food added Very warm or very cold
room temperatures
Refrigerator
Freezer:
Refrigerator3
FreezerA
Refrigerator2
FreezerB
..I
Refrigerator3
FreezerA
Refrigerator
Freezer
Power Saving Control.. .
The Power Saving Control on the Control Con- sole operates electric heaters around the door openings. These heaters help keep moisture from faming on the outside of the refrigerator.
I.Use the “CONSUMES LESS ENERGY” setting when humidity is low.
2.Use the “REDUCES EXTERIOR MOISTURE” setting Only if moisture forms on the outside of the refrigerator.