Whirlpool ETl7HK Reversing the door swing, Changing the light bulb, Removing the base grille

Reversing the door swing.. .

You con change the hinges on your refrigerator so the doors open the other way. Refer to the instruction sheet included with your refrigerator.

n:.-K;~I”r-,’..P,li,.“‘F?*w&r,‘w337‘i‘i.- msa--*LC’“liw,, -,2ur.%P’~z!.,. ‘I : -_,,..i .:. I “. /, ,,^ .1

Changing the light bulb...

WARNING: Before removing the light shield for cleaning or for replacing the bulb, etther unplug refrigerator or discon-

nect eiectrlclty leading to re- frigerator at the maln power urpply. Shock and InJury can occur if eiec- trtclty remains connected.

Before removing the light shield for cleaning or for replacing the bulb, unplug the refrigerator.

1. Push lightly on the top center of the light shield until

Push in the Center;the notched tab unhooks from the control panel. 2. Pull down on the shield until the tab clears the con-

trol panel.

3. Lift the bock hooks out of their slots.

4. Replace with a 40-watt appliance bulb.

5. Replace light shield in reverse order.

L,l.lB‘ =%;ciI,..I ..XIoIIcllri...a-IRLw.E<I.-5’.uiCd.re?.‘“!8a*ia,aas*-&c.~.,kU~’l’lww I-.*, I/-. 2.2 _WI _, :_(,r.u .I I-‘**.L I’. ,.*,, ..iP-mr.

Removing the base grille...

1.Open the doors.

3.Do not remove Tech sheet fastened behind grille. 1. Line up grille support tabs with metal clips.

2.Push firmly to snap into place.

3.Close the’doors.

>. ., , 1%. .I> i i

Ice cube trays.. .

If cubes ore not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes ore stored, the smaller they get.

To remove ice:

1.Hold troy at both ends.

2.Slightly twist.