Adjusting shelves.. .
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavv food items.
To remove glass shelves:
1.Tilt up at front.
2.Lift up at back.
3.Pull shelf straight out.
Glass shelves ore
1.Guide the rear hooks into the slots tn the shelf supports.
2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position
To remove door shelves:
lLift up and out
To replace:
lInsert hooks into guides on both sides.
lPush down.
i | .., | ^ ..Iam. | z.T.ru+..,* | c QnPS%azze |
Removing the crispers and crisper covers.. .
lSlide crispers straight out to stop. l Lift the front.
l Slide the rest of the way out. l Replace in reverse order.
Covers are held in place by two pegs at the back and two notched tabs in front.
Push the lab
to Clear the Cover.
Snap Back Into Place. | . | ‘7’ | ’ |
|
|
lPress front tabs out of the way.
0 Lift cover front.
l Lift back off the pegs,
l Replace in reverse order.
The center leg can be made shorter or longer to help level the crisper covers, if necessary. Turn the leg clockwise to make it longer. Turn it counter- clockwise to shorten it
Removing freezer shelf.. .
lLift front sliahtlv.
lLift back 0% supports.
l Replace in reverse order.
Lift the Front
Then the Back
a’ | *,x.,_ITIIwCa- | eL+*, | .T. |
Adjusting crisper
Humidity Control...
You can control the amount of humrdity In the mois-
The control can be adjusted to any setting be- tween LO and HI
LO (open) lets moist air out of crisper for best storage of fruits and vegetables
with skrns.
HI [closed] keeps moist air in the cris- per for best storage of fresh leafy vege- tables
Moving the meat pan.. .
The meat pan can be taken out and moved the same way as the shelves, Remove the meat pan first.
Removlng:
I, Slide the meat pan out to stop.
2.Lift the front of meat pan.
3.Slide pan the rest of the way out.
4.Tilt cover up at front.
5.Lift up at back.
6.Pull straight out.
Replaclng:
I, Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of cover until rear hocks drop into slots. Lower front of cover to level position.
3.Replace meat pan in reverse order.
Changing the light bulb.. .
Before removing the lrght shield for cleaning or for
replaclng the bulb, unplug the refrigerator. Use
appliance bulbs only
lPush lightly on the top center of the light shield until
the notched tab unhooks from the control panel
l Pull down on the shield untrl the tab clears the control panel.
lLift the back hooks out of therr slots.
l Replace wrth a
6