Whirlpool ET180K manual

Pull out to the stop, lift the front

thentheback. . UJ

Removing the crispers and crisper cover

To remove the crispers:

1.Slide crisper straight out to the stop, lift front, then slide the rest of the way out.

2.Replace in reverse order.

To remove the cover:

1.Push up glass insert from bottom, then slide out with both hands.

2.Lift front of cover frame and remove cover support.

3.Lift out cover frame by pulling up and out.

To replace the cover:

1.Fit back of cover into notch supports on walls of refrigerator, then lower into place.

2.Replace cover support with the long tab toward the front.

NOTE: If the support needs adjustment, turn base clockwise to raise or counter-clockwise to lower.

3.Slide back of glass insert into place, then lower front.

Changing the light bulb

Electrical Shock Hazard Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Shock and injury can occur if electricity remains connected.

To change refrigerator light:

1.Disconnect refrigerator from power supply.

2.Reach behind the Control Console to find bulb.

3.Remove bulb.

4.Replace with a 40-watt appliance bulb.

5.Reconnect power supply.

NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace bulb with one of the same size and shape.

Reversing the door swing

You can change the hinges on your refrigerator so the doors open the other way. You will need a Phillips head screwdriver. Refer to the instruction sheet included with your refrigerator.

7