2.Lift the signal arm so It clicks into the OFF position Ice can stall be dispensed, but no more will be made.
3.Lift the front of the storage bin. Pull It out.
4.Empty the bin Use hot or warm water to melt the ice if necessary. Never use anything sharp to break up ice in the bin. This can damage the btn and dispenser mechanism.
5.Wash with mild detergent. Rtnse well. Do not use harsh or abrasive cleansers or solvents.
6.When replacing the bin, make sure it is pushed in all the way. Push the signal arm down to the ON position to restart ice production.
To turn on night light, slide dispenser LIGHT switch to the left. See page 9 for directions for changing dispenser light.
13