Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply. Failure to do so could result in elec- trical shock or personal injury.
To change refrligerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Console to find bulb.
3.Remove bulb.
4.Replace with a
5.Reconnect to power supply.
To change crisper light:
1.Disconnect relrigerator from power supply.
2.Pull top of light shield forward until it snaps free.
3.Lower light shield to clear bottom supports.
4.Pull light shield straight out to remove.
5.Replace bulb with a
6.Replace light shield in reverse order.
7.Reconnect power supply.
To change light behind quick freeze compartment:
1.Disconnect refrigerator from power supply.
2.Lift and secure quick freeze compartment door.
3.Remove light shield by pulling top forward.
4.Replace bulb with a
5.Replace the light shield.
6.Reconnect power supply.
To change lighl below ice bin:
1.Disconnect refrigerator from power supply.
2.Push in sides of light shield until it snaps free
3.Replace bulb with a
4.Replace the liclht shield.
5.Reconnect power supply.
To change dispenser light:
1.Disconnect refrigerator from power supply.
2.Reach the bulb through the dispenser area.
3.Replace with e
4.Reconnect power supply.
NOTE: Not all commercial appliance bulbs will fit your refrigerator. l3e sure to replace bulb with one of the same size and shape.
9