Plan to remove and empty the storage bin:
lIf the ice dispenser has not, or will not be used for a week or more;
lIf a power failure causes ice in the bin to melt and freeze together;
lIf the ice dispenser is not used regularly.
1.Pull the covering panel out from the bottom and slide it to the rear.
2.Lift the signal tion. Ice can be made.
arm so it clicks into the OFF posi- still be dispensed, but no more will
Night light S
3.Lift the front of the storage bin. Pull it out.
4.Empty the bin. Use hot or warm water to melt the ice if necessary. Never use anything sharp to break up ice in the bin. This can damage the bin and dispenser mechanism.
5.Wash with mild detergent. Rinse well. Do not use harsh or abrasive cleansers or solvents.
6.When replacing the bin, make sure it is pushed in all the way. Push the signal arm down to the ON position to restart ice production.
The night light uses a
10