Whirlpool W10329360A Water Supply Requirements, Connect the Water Supply, Tools Needed

Page 4

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Nut driver

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

¹⁄₄" Drill bit

 

adjustable wrenches

■

Cordless drill

 

 

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

■For models with water filters, the disposable water filter should be replaced at least every 6 months.

Water Pressure

A cold water supply with water pressure of between 35 and 120 psi (241 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi (241 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

■If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Find a ¹⁄₂" to 1¹⁄₄" (12.7 mm to 31.8 mm) vertical cold water pipe near the refrigerator.

IMPORTANT:

■Make sure it is a cold water pipe.

■Horizontal pipe will work, but the following procedure must be followed: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.

4.Determine the length of copper tubing you need. Measure from the connection on the rear of the refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

 

A

 

B

 

C

 

D

 

E

 

F

 

G

A. Cold water pipe

E. Compression sleeve

B. Pipe clamp

F. Shutoff valve

C. Copper tubing

G. Packing nut

D. Compression nut

 

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so the washer makes a watertight seal. Do not overtighten.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten or you may crush the copper tubing.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Remove the Packaging Clean Before UsingUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Water Supply Requirements Connect the Water SupplyReverse Osmosis Water Supply Tools NeededRefrigerator Doors and Drawer Connect to RefrigeratorRemove and Replace Handles To Remove Handles To Replace HandlesRemove Drawer Front Replace Drawer FrontReplace Doors and Hinges Remove and Replace Freezer DrawerBottom Hinges Adjust the Doors Using theControlsRefrigerator USE Opening and Closing DoorsTo Adjust Set Point Temperatures Door AlarmFilter Reset Temperature Display FCIce Maker and Ice Storage Bin Crisper Humidity ControlWater and Ice Dispenser Water Filtration System Dispenser LightDispenser Lock To Lock and Unlock DispenserRefrigerator Care CleaningChanging the Light Bulb Troubleshooting Refrigerator OperationMotor seems to run too much Refrigerator seems noisyTemperature and Moisture Temperature is too warmPage Water Filter Certifications Performance Data Sheets Application Guidelines/Water Supply ParametersModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters Limited Warranty Items Excluded from WarrantyThis limited warranty does not cover Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurInstructions D’INSTALLATION Exigences demplacementDéballagedu réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre SpécificationsélectriquesSpécifications del’alimentationen eau Alimentation en eau par osmose inverseRaccordement à une canalisation d’eau Raccordement de la canalisation deauRaccordement au réfrigérateur Achever l’installation Réinstallation des poignéesPortes ettiroir du réfrigérateur Enlèvement des portes et des charnièresRéinstallation de la façade du tiroir Réinstallation des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Enlèvement de la façade du tiroirCharnières inférieures Utilisation des commandes Utilisation DU RéfrigérateurAjustement desportes Ouverture et fermeture des portesHumidity Control commande dhumidité Door Alarm alarme de la porteFilter Reset réinitialisation du filtre Désactivation/activation du refroidissementMachineà glaçons et bac d’entreposage Distributeur d’eau et de glaçons Taux de production de glaçonsDistribution de glaçons et d’eau Éclairage du distributeurSystème de filtrationde leau Entretien DU RéfrigérateurNettoyage Remplacement del’ampoule d’éclairage Nettoyage de lécran tactile sur le panneau daffichageNettoyage des surfaces extérieures Nettoyage du condenseurDépannage Fonctionnement du réfrigérateurLe réfrigérateur ne fonctionne pas Le moteur semble trop tournerGlaçons et eau Température et humiditéLes portes sont difficiles à ouvrir Les glaçons sont creux ou petits Feuilles DE Données SUR LA Performance Système de filtration d’eau intérieurModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Garantie DE Gros Appareil Ménager Whirlpool Corporation Garantie LimitéeÉléments Exclus DE LA Garantie La présente garantie limitée ne couvre pasPage W10329360A SP PN W10329361A All rights reserved

W10329360A specifications

The Whirlpool W10329360A is a premium appliance designed for modern kitchens, seamlessly blending functionality with stylish design. This advanced dish rack serves as a crucial part of the dishwashing process, providing ample space for wet dishes while ensuring optimal drying conditions. One of its standout features is its innovative design, which allows dishes to be stacked efficiently, maximizing space without compromising accessibility.

One notable characteristic of the W10329360A is its adjustable tiers. The tiers can be modified to accommodate various types of cookware and dinnerware. This flexibility is particularly beneficial for households that frequently use oversized pots and pans, providing the necessary room for larger items. The dish rack also features a durable stainless steel construction, making it resistant to rust and corrosion, which is essential for maintaining a clean and hygienic kitchen environment.

In addition to its robust build, the Whirlpool W10329360A incorporates smart drainage technology. This feature ensures that water is directed away from the clean dishes, facilitating a quicker drying process and reducing the risk of water spots. The integrated drainage system works efficiently, allowing the excess water to flow into nearby sinks without creating a mess on the countertop.

Another important aspect is the rack's anti-slip design. Equipped with soft rubber feet, the dish rack stays securely in place on your counter, preventing any accidental slips or spills. This stability is crucial when stacking fragile glassware and china. Its elegant finish not only complements a variety of kitchen decors but also enhances the overall aesthetic of your dishwashing station.

Whirlpool has always focused on user-friendliness, and the W10329360A is no exception. It is easy to clean, with smooth surfaces that can be quickly wiped down to maintain peak hygiene. This ease of maintenance extends the product's longevity, making it a reliable addition to any kitchen.

Overall, the Whirlpool W10329360A combines practicality with cutting-edge features, making it an ideal choice for both busy families and those who appreciate a well-organized kitchen space. Whether you're dealing with an everyday meal's dishes or hosting a large gathering, this dish rack is designed to meet your needs efficiently and stylishly.
Top Page Image Contents