Whirlpool W10329360A Crisper Humidity Control, Ice Maker and Ice Storage Bin

Page 10

Crisper Humidity Control

You can control the amount of humidity in the moisture-sealed crisper. Depending on your model, adjust the control to any setting between FRUIT and VEGETABLES or LOW and HIGH.

FRUIT / LOW (open) for best storage of fruits and vegetables with skins.

VEGETABLES / HIGH (closed) for best storage of fresh, leafy vegetables.

Ice Maker and Ice Storage Bin

IMPORTANT:

■Flush the water system before turning on the ice maker. See “Water and Ice Dispenser.”

■The ice maker and storage bin are located in the upper left- hand side of the refrigerator compartment.

Turning the Ice Maker On/Off

The On/Off switch is located on the ice maker.

To turn on the ice maker, press the switch to the ON position.

To manually turn off the ice maker, press the switch to the OFF position.

NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON position.

Removing and Replacing Ice Storage Bin

To Remove the Ice Storage Bin:

1.Hold the base of the storage bin and press the release button on the lower right.

2.Pull the storage bin out until resistance is felt. Lift up the front of the ice bin and remove.

3.Press the switch to the OFF position

To Replace the Ice Storage Bin:

IMPORTANT: It may be necessary to turn the auger driver, behind the ice bin, counterclockwise to properly align the ice bin with the auger driver. The ice storage bin must be locked in place for proper ice dispensing.

1.Press the switch to the ON position

2.Slide the ice bin into the guide rails located on either side of the enclosure.

3.Push the ice bin in until resistance is felt. Raise the front slightly and push the ice bin in until an audible “click” is heard.

A

B

A. ON position

B. Auger driver

Ice Production Rate

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

■The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period.

■To increase ice production, lower the freezer and refrigerator temperature. See “Using the Controls.” Wait 24 hours between adjustments.

Remember

■The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

■Do not use anything sharp to break up the ice in the bin. This can cause damage to the ice bin and dispenser mechanism.

■Do not store anything on top of the ice maker or in the ice storage bin.

Water and Ice Dispenser

IMPORTANT:

■After connecting the refrigerator to a water source, flush the water system. Use a sturdy container to depress and hold the water dispenser pad for 5 seconds, then release it for

5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser pad (5 seconds on, 5 seconds off) until a total of

4 gal. (15 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

NOTE: After five minutes of continuous dispensing, the dispenser will stop dispensing water to avoid flooding. To continue dispensing, remove the container and press the dispensing lever again.

■The dispenser will dispense either water or cubed ice.

■Allow 24 hours for the refrigerator to cool down and chill water. Dispense enough water every week to maintain a fresh supply.

■Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsRemove the Packaging Clean Before Using Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Tools NeededRemove and Replace Handles To Remove Handles Refrigerator Doors and DrawerConnect to Refrigerator To Replace HandlesReplace Doors and Hinges Remove Drawer FrontReplace Drawer Front Remove and Replace Freezer DrawerBottom Hinges Refrigerator USE Adjust the DoorsUsing theControls Opening and Closing DoorsFilter Reset To Adjust Set Point TemperaturesDoor Alarm Temperature Display FCIce Maker and Ice Storage Bin Crisper Humidity ControlWater and Ice Dispenser Dispenser Lock Water Filtration SystemDispenser Light To Lock and Unlock DispenserRefrigerator Care CleaningChanging the Light Bulb Motor seems to run too much TroubleshootingRefrigerator Operation Refrigerator seems noisyTemperature and Moisture Temperature is too warmPage Water Filter Certifications Performance Data Sheets Application Guidelines/Water Supply ParametersModel UKF8001AXX-200 Capacity 200 Gallons 757 Liters This limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions D’INSTALLATIONExigences demplacement Avant de jeter votre vieux réfrigérateur ou congélateurSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Alimentation en eau par osmose inverseRaccordement à une canalisation d’eau Raccordement de la canalisation deauRaccordement au réfrigérateur Portes ettiroir du réfrigérateur Achever l’installationRéinstallation des poignées Enlèvement des portes et des charnièresRetirer et réinstaller le tiroir du congélateur Réinstallation de la façade du tiroirRéinstallation des portes et des charnières Enlèvement de la façade du tiroirCharnières inférieures Ajustement desportes Utilisation des commandesUtilisation DU Réfrigérateur Ouverture et fermeture des portesFilter Reset réinitialisation du filtre Humidity Control commande dhumiditéDoor Alarm alarme de la porte Désactivation/activation du refroidissementMachineà glaçons et bac d’entreposage Distribution de glaçons et d’eau Distributeur d’eau et de glaçonsTaux de production de glaçons Éclairage du distributeurSystème de filtrationde leau Entretien DU RéfrigérateurNettoyage Nettoyage des surfaces extérieures Remplacement del’ampoule d’éclairageNettoyage de lécran tactile sur le panneau daffichage Nettoyage du condenseurLe réfrigérateur ne fonctionne pas DépannageFonctionnement du réfrigérateur Le moteur semble trop tournerGlaçons et eau Température et humiditéLes portes sont difficiles à ouvrir Les glaçons sont creux ou petits Feuilles DE Données SUR LA Performance Système de filtration d’eau intérieurModèle UKF8001AXX-200 /Capacité 200 gallons 757 litres Éléments Exclus DE LA Garantie Garantie DE Gros Appareil Ménager Whirlpool CorporationGarantie Limitée La présente garantie limitée ne couvre pasPage W10329360A SP PN W10329361A All rights reserved

W10329360A specifications

The Whirlpool W10329360A is a premium appliance designed for modern kitchens, seamlessly blending functionality with stylish design. This advanced dish rack serves as a crucial part of the dishwashing process, providing ample space for wet dishes while ensuring optimal drying conditions. One of its standout features is its innovative design, which allows dishes to be stacked efficiently, maximizing space without compromising accessibility.

One notable characteristic of the W10329360A is its adjustable tiers. The tiers can be modified to accommodate various types of cookware and dinnerware. This flexibility is particularly beneficial for households that frequently use oversized pots and pans, providing the necessary room for larger items. The dish rack also features a durable stainless steel construction, making it resistant to rust and corrosion, which is essential for maintaining a clean and hygienic kitchen environment.

In addition to its robust build, the Whirlpool W10329360A incorporates smart drainage technology. This feature ensures that water is directed away from the clean dishes, facilitating a quicker drying process and reducing the risk of water spots. The integrated drainage system works efficiently, allowing the excess water to flow into nearby sinks without creating a mess on the countertop.

Another important aspect is the rack's anti-slip design. Equipped with soft rubber feet, the dish rack stays securely in place on your counter, preventing any accidental slips or spills. This stability is crucial when stacking fragile glassware and china. Its elegant finish not only complements a variety of kitchen decors but also enhances the overall aesthetic of your dishwashing station.

Whirlpool has always focused on user-friendliness, and the W10329360A is no exception. It is easy to clean, with smooth surfaces that can be quickly wiped down to maintain peak hygiene. This ease of maintenance extends the product's longevity, making it a reliable addition to any kitchen.

Overall, the Whirlpool W10329360A combines practicality with cutting-edge features, making it an ideal choice for both busy families and those who appreciate a well-organized kitchen space. Whether you're dealing with an everyday meal's dishes or hosting a large gathering, this dish rack is designed to meet your needs efficiently and stylishly.
Top Page Image Contents