Ceramic Surface Units
Installing
You can install ceramic surface units in the left basin (Model RC8720ED) or both basins (Model RC8700ED) of your cooktop.
NOTE: The pictures in this section show the ceramic surface unit installed in the left basin, where the receptacle is in the front wall of the basin. To get the ceramic surface unit accessory, order Part Number RCM30DB/DQ from a Whirlpool service company or dealer (see Step 2 on page 38) or call the Whirlpool Consumer Assistance Center
To install:
Terminal receptacle
Terminal plug
1.Make sure the control knobs are turned off.
2.If the grill grates, element, and
Terminal receptacle
Terminal plug
3.Position the accessory terminal plug towards the terminal receptacle.
4.Slide the accessory towards the recep- tacle until the terminal plug is firmly set in receptacle.
5.Lower the opposite end of the accessory into the cooktop until it is flush with the surface.
16