CERAMIC SURFACE UNITS
To remove:
Terminal |
receptacle |
1.Make sure the control knobs are turned off and the cooktop is cool.
Tab
Opening
2.Lift up on the “tab” located on the accessory until the top of the accessory clears the opening of the cooktop by about two inches. Lifting the accessory too high while still set firmly in receptacle could damage the terminal plug.
3.To pull out of the terminal, hold acces- sory by the sides and slide away from the terminal receptacle. Lift out when fully unplugged.
NOTE: Do not stack accessories where they may fall or be damaged. Never store other materials on top of a
17