Preliminary System Specifications (subject to change without notice)
Configuration: | Three way, biamp (active two way) or triamp (full three way active) | |
Frequency Response: | 52Hz - 18KHz (+/- 3dB) |
|
Sensitivity: | biamp: 97dB (2.83v @ 1m) | |
| triamp: 99dB (2.83v @ 1m) | |
Nominal coverage: | Horizontal:140deg. | Vertical: Dependant on number of elements used |
Nominal Impedance: | 8 ohms, low frequency in biamp mode, 16 ohms low frequency in triamp mode | |
| 16 ohms, high frequency |
|
Transducers: |
|
|
Low Frequency: | two 10" (254mm) long excursion, high power, 3" (76mm) voice coil, 16 ohm, 380 | |
| watts rms each |
|
High Frequency: | 3.0” (76mm) diaphragm, 1.4" (36mm) exit, 16 ohm neodymium compression | |
| driver on proprietary | |
Recommended Amplifier Power: | 300 watts high frequency |
|
| 700 watts mid frequency triamp mode | |
| 700 watts low frequency triamp mode | |
| 1400 watts low/mid frequency in biamp mode | |
Enclosure: |
|
|
Type: | Bass reflex (ported), trapezoidal | |
Material: | Cored Composite laminate | |
Finish: | Black or white texture coat | |
Grille: |
| |
Connectors: | two Neutrik NL8 |
|
Attachment points: | Self contained rigging configuration. Each front receiver tubes contains a | |
| captive articulated joint (knuckle) and two | |
| mounting block has integral mounting link and one | |
Weight: | 70lbs, 31.8kg |
|
Dimensions: | 10.75" H x 27.5"W x 20.25"D | |
| 27.3cm H x 69.85cm W x 51.43cm D | |
Accessories
Array Frames:
Software
10
Small array frame- 8 enclosure maximum for flown (suspended) applications,
4enclosure max. for stacking on
Large Array Frame- 24 enclosure maximum for flown (suspended) applications, 12 enclosure max. for deck stacking.
Frame weight 84lbs. / 38.1kg
EASE Focus line array modeling software tool available; visit www.qscaudio.com or contact QSC’s Technical Services for DSP files for both QSControl.net and Signal Manager
5/16” dia. x 0.75” long,
5/16” dia. x 1.25” long,