Installation Requirements, Tools and Parts

In the State of Massachusetts, the following installation instructions apply:

■Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts.

■If using a ball valve, it shall be a T-handle type.

■A flexible gas connector, when used, must not exceed 3 feet.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Tools needed

■	Tape measure	■	Marker or pencil
■	Flat-blade screwdriver	■	Pipe-joint compound
■	¹⁵⁄₁₆" combination wrench		resistant to LP gas
■	¹⁵⁄₁₆" combination wrench	■ Noncorrosive leak-detection
■	Pipe wrench	■ Noncorrosive leak-detection
■	Pipe wrench		solution
			solution

■Wrench or pliers

Parts supplied

■Gas pressure regulator

■Burner grates

■Burner caps

Parts needed

Check local codes and consult gas supplier. Check existing gas supply and electrical supply. See “Electrical Requirements” and “Gas Supply Requirements” sections.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

■It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located on the underside of the cooktop base.

A. Model/serial rating plate

■To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

■The cooktop must be a specified cooktop that is approved to be installed either alone or over an undercounter built-in oven. Check the cooktop base approved installation label for your cooktop model number and approved combinations of cooktops and ovens that can be installed. If you do not find this label, your cooktop may not be approved for use over an undercounter built-in oven. Contact your dealer to confirm that your cooktop is approved.

■Ovens approved for this type of installation will have an approval label located on the top of the oven. If you do not find this label, contact your dealer to confirm that your oven is approved. Refer to oven manufacturer’s Installation Instructions for approval for built-in undercounter use and proper cutout dimensions.

■The cooktop should be installed in a location away from strong draft areas, such as windows, doors and strong heating vents or fans.

■All openings in the wall or floor where cooktop is to be installed must be sealed.

■Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

■Grounded electrical supply is required. See “Electrical Requirements” section. Proper gas supply connection must be available. See “Gas Supply Requirements” section.

■The cooktop is designed to hang from the countertop by its side or rear flanges.

■The gas and electric supply should be located as shown in “Cabinet Dimensions” section so that they are accessible without requiring removal of the cooktop.

■Provide cutout in right rear corner of cutout enclosure as shown to provide clearance for gas inlet, power supply cord, and to allow the rating label to be visible.

IMPORTANT: To avoid damage, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage.

Mobile Home - Additional Installation Requirements

The installation of this cooktop must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this cooktop must conform with the current standards CAN/CSA-A240-latest edition, or with local codes.

W10545672A specifications

The Whirlpool W10545672A is a versatile and highly efficient refrigerator that merges cutting-edge technology with functional design, catering to the needs of modern households. This appliance is renowned for its spacious interior and smart features, making it an indispensable addition to your kitchen.

One of the standout features of the W10545672A is its innovative temperature management system. Equipped with a temperature control system that ensures the optimal environment for various food types, it maintains a consistent temperature throughout the refrigerator and freezer compartments. This is crucial for food preservation, minimizing spoilage and waste.

The refrigerator comes with an adjustable shelving system that offers flexibility to accommodate taller items, such as large bottles or containers. The shelves are made from durable glass, allowing easy cleaning while providing a sturdy support structure for your groceries. The sliding shelves make it simple to access items without reaching too far back, significantly improving usability.

The W10545672A is designed with energy efficiency in mind. Its Energy Star certification signifies that it meets strict energy efficiency guidelines, making it an environmentally responsible choice. Users can enjoy reduced energy bills while helping to conserve resources.

In terms of storage solutions, the W10545672A features a variety of door bins, a crisper drawer, and specialized storage compartments. The humidity-controlled crisper drawer keeps fruits and vegetables fresh longer, while the spacious door bins can accommodate condiments and smaller items for easy access.

Additionally, the Whirlpool W10545672A includes advanced technologies such as a fingerprint-resistant finish, which keeps the exterior looking clean and sleek while reducing the appearance of smudges and fingerprints. This is particularly beneficial in busy households where the refrigerator often sees frequent use.

Another notable attribute is the LED lighting, which illuminates the fridge interior more efficiently than traditional bulbs. This not only enhances visibility but also adds to the overall energy efficiency of the unit.

Overall, the Whirlpool W10545672A stands out for its combination of spacious design, advanced temperature control, energy efficiency, and thoughtful storage solutions. Whether for a growing family or a culinary enthusiast, this refrigerator is engineered to meet a wide range of storage needs and preferences while maintaining sleek aesthetics and functionality.