Complete Installation, Complete Connection

Complete Connection

1.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

A. Closed valve

B. Open valve

2.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found.

3.Remove surface burner caps and grates from parts package. Align notches in burner caps with pins in burner base. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light.

Place burner grates over burners and caps.

A. Igniter electrode

B. Burner cap

C. Burner base

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

Check Operation of Surface Burners

Push in and turn the surface burners control knobs to light.

The surface burner flame should light within 4 seconds. The first time a surface burner is lighted it may take longer that 4 seconds to light because of air in the gas line.

Check the flame on “HIGH” for a blue color. It should be clean and soft in character. No yellow tip, blowing or lifting of flame should occur. Occasional orange flashes are normal and reflect different elements in the air or gas.

After verifying the proper burner operation, turn the control knobs to “OFF.”

If burners do not light properly:

■Turn surface burner control knob to the “OFF” position.

■Check that the power supply cord is plugged in and the circuit breaker has not tripped or the fuse blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Recheck operation of surface burners. If a burner does not light at this point, contact your dealer or authorized service company for assistance.

Check Flame Height

Adjust the height of surface burner flames.

The surface burner “low” flame should be a steady blue flame approximately ¼" (0.64 cm) high.

A.Low flame

B.High flame

If the “low” flame needs to be adjusted:

This cooktop is shipped from the factory with low and high flame settings adjusted for use with Natural gas.

To set for use with LP, the flame can be adjusted using the adjustment screw located underneath the control knob.

Complete Installation

Electronic Ignition System

Initial lighting and gas flame adjustments

This cooktop is equipped for electronic auto-reignition by means of a spark igniter located at the rear of each burner. The burners are designed to light at any valve rotation that admits sufficient gas flow to support a flame and to automatically relight following a loss of flame due to a draft or other adverse condition. This feature is provided only as a convenience.

A. Control knob	C. Adjustment screw
B. Knob hole (knob removed)

1.Remove the control knob from valve stem.

2.Remove rubber grommet.

3.Use a small flat-blade screwdriver to turn the adjustment screw clockwise until tight. Do not overtighten.

4.Replace rubber grommet and control knob.

5.Repeat for remaining burners.

W10545672A specifications

The Whirlpool W10545672A is a versatile and highly efficient refrigerator that merges cutting-edge technology with functional design, catering to the needs of modern households. This appliance is renowned for its spacious interior and smart features, making it an indispensable addition to your kitchen.

One of the standout features of the W10545672A is its innovative temperature management system. Equipped with a temperature control system that ensures the optimal environment for various food types, it maintains a consistent temperature throughout the refrigerator and freezer compartments. This is crucial for food preservation, minimizing spoilage and waste.

The refrigerator comes with an adjustable shelving system that offers flexibility to accommodate taller items, such as large bottles or containers. The shelves are made from durable glass, allowing easy cleaning while providing a sturdy support structure for your groceries. The sliding shelves make it simple to access items without reaching too far back, significantly improving usability.

The W10545672A is designed with energy efficiency in mind. Its Energy Star certification signifies that it meets strict energy efficiency guidelines, making it an environmentally responsible choice. Users can enjoy reduced energy bills while helping to conserve resources.

In terms of storage solutions, the W10545672A features a variety of door bins, a crisper drawer, and specialized storage compartments. The humidity-controlled crisper drawer keeps fruits and vegetables fresh longer, while the spacious door bins can accommodate condiments and smaller items for easy access.

Additionally, the Whirlpool W10545672A includes advanced technologies such as a fingerprint-resistant finish, which keeps the exterior looking clean and sleek while reducing the appearance of smudges and fingerprints. This is particularly beneficial in busy households where the refrigerator often sees frequent use.

Another notable attribute is the LED lighting, which illuminates the fridge interior more efficiently than traditional bulbs. This not only enhances visibility but also adds to the overall energy efficiency of the unit.

Overall, the Whirlpool W10545672A stands out for its combination of spacious design, advanced temperature control, energy efficiency, and thoughtful storage solutions. Whether for a growing family or a culinary enthusiast, this refrigerator is engineered to meet a wide range of storage needs and preferences while maintaining sleek aesthetics and functionality.