Whirlpool SC8536ER Using your cooktop, Using the Surface Burners, Control knobs must be pushed

Page 5

Using your cooktop

RIGHT FRONT

CONTROL KNOB CONTROL KNOB CONTROL KNOB CONTROL KNOB CONTROL KNO

Using the Surface

Burners

These cooktops are equipped with electronic ignitors. Electronic ignitors

automatically light the burners each time they are used.

I

Control knobs must be pushed in,

then turned to the LITEposition. The clicking sound is the ignitor sparking.

To stop the clicking sound after the burner lights, turn the control knob back to a desired setting. The control knob has stops at HI and LO, however it can be set anywhere between HI and LO. Do not cook with the control In the LITEporltlon.

In Case of a Prolonged Power Failure

Surface burners with electronic igni- tors can be manually lighted. Hold a lit match near a burner and turn the

I control to the LITEposition. After the burner lights, turn the control to the desired setting.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Cooktop Before you use your cooktop ContentsSee Cooking Guide for important safety and use intormation Safety InstructionsModels SC8536ER and SC8436ER Parts and featuresCopy your Model and Serial Numbers here Using the Surface Burners Using your cooktopCase of a Prolonged Power Failure Control knobs must be pushedBefore using the griddle for the first time Using the Griddle Model SC8536 onlyApproxlmafe mlnlmum griddle cooking times MEDSurface Burner Grates and Griddle Iaring for your cooktopTypicaltop Burnerflame Lift-Up CooktopSurface Burners Part Cleaning ChartHOW to Clean If you need assistance Before calling for assistanceIf you have a problem If you need serviceWhirlpool Microwaw Oven Range Product
Top Page Image Contents