Whirlpool WRT111SFAF Meat Drawer, Crisper, Utility or Egg Bin, Style 1 Plastic Cover

Page 10

Meat Drawer

(on some models)

To remove and replace the meat drawer:

1.Slide meat drawer out to the stop.

2.Lift front of meat drawer with one hand while supporting bottom of drawer with other hand. Slide drawer out the rest of the way.

3.Replace the drawer by sliding it back in fully past the drawer stop.

Meat Drawer Cover (on some models)

To remove and replace the meat drawer cover:

1.Remove the meat drawer.

2.Push the cover back to release the rear clips from the shelf. Tilt the cover up at the front, and pull it forward.

3.Replace the meat drawer cover by fitting the notches and clips on the cover over the rear and center crossbars on the shelf.

4.Lower cover into place and pull the cover forward to secure the rear clips onto the shelf.

5.Replace the meat drawer.

NOTE: In some models the meat pan moves sideways on the shelf to allow for flexible positioning.

Meat Storage Guide

Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times. When storing meat longer than the times given, freeze the meat.

Fresh fish or shellfish

use same day as purchased

Chicken, ground beef, variety meats (liver)

...................... 1-2 days

Cold cuts, steaks/roasts

3-5 days

Cured meats

7-10 days

Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.

Crisper Cover

Style 1 - Plastic Cover

To remove and replace the crisper cover:

1.Remove the crisper(s).

2.Lift the front of the cover to remove the cover support. Then lift the cover up and slide it out.

3.Replace the cover by fitting the cover tabs into lowest cabinet slots and pushing them in. Lower the front retainers into place.

4.Insert cover support (with the long tab toward the front) into the groove on the underside of the cover.

NOTE: If the support needs adjustment, turn the base of the support clockwise to raise or counterclockwise to lower.

Crisper

(on some models)

Crisper Drawers

To remove and replace the crisper drawer:

1.Slide the crisper drawer straight out to the stop. Lift the front and slide the drawer out the rest of the way.

2.Replace the drawer by sliding the drawer in fully past the stop.

Style 2 - Glass Cover

To remove and replace the crisper cover:

1.Pull the glass straight out.

2.Replace the glass by pushing it straight in.

Utility or Egg Bin

(on some models)

Depending on your model, you may have a one, two or three piece bin. Eggs may be stored in the egg tray or loose in the bin.

NOTE: Store eggs in a covered container for long-term storage. If your model does not have an egg storage bin, store eggs in their original container on an interior shelf.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerator User Instructions Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerUnpack the Refrigerator Installation InstructionsClean Before Using Location RequirementsConnect the Water Supply Electrical RequirementsWater Supply Requirements On some modelsConnect to Refrigerator Refrigerator DoorsStyle Remove Doors and HingesDoors Reverse Doors optionalCabinet Replace Doors and HingesDoor Swing Reversal optional Adjust the Temperature Control Adjust the DoorsUsing the Controls Adjust the Air Flow ControlIce Maker Refrigerator FeaturesOn some models Accessory Refrigerator ShelvesUtility or Egg Bin Meat DrawerCrisper Style 1 Plastic CoverFreezer Shelf Freezer FeaturesDoor Features Door Rails or TrivetsChanging the Light Bulbs CleaningRefrigerator Care Vacation and Moving CareTo run too much Problem SolverDoor is opened often, or if the door has been left open Accessories Items Excluded from Warranty Whirlpool Corporation Major Appliance WarrantyLimited Warranty This limited warranty does not coverSeguridad DEL Refrigerador Antes de tirar su viejo refrigerador o congelador Instrucciones DE InstalaciónDesempaque el refrigerador Limpie su refrigerador antes de usarloRequisitos eléctricos Requisitos de ubicaciónMétodo de conexión a tierra recomendado En algunos modelos Requisitos del suministro de aguaConexión del suministro de agua Suministro de agua de ósmosis inversaCómo terminar la instalación Puertas del refrigeradorCómo quitar las puertas y las bisagras Notas Cambio del sentido de abertura de las puertas opcional Uso de los controles USO DE SU RefrigeradorAjuste las puertas Cómo ajustar los controlesEn algunos modelos accesorio Fábrica de hieloRegule el control del flujo de aire Cajón para carnes Características DEL RefrigeradorEstantes del refrigerador Cajón para verdurasEstante del congelador Características DEL CongeladorCompartimiento para huevos o de uso General Estilo 2 Tapa de vidrioRieles o anaqueles de la puerta Características DE LA PuertaCuidado DE SU Refrigerador Portalatas y recipientes de la puertaSi Ud. decide apagar el refrigerador antes de irse Cómo cambiar los focosCuidado durante las vacaciones Mudanzas VacacionesSolución DE Problemas Del de los controles Hay acumulación de humedad en el interiorExclusiones DE LA Garantía AccesoriosGarantía Limitada Exclusión DE Garantías ImplícitasW10465565A

WRT111SFAF specifications

The Whirlpool WRT111SFAF is an ideal choice for those seeking a reliable and efficient refrigerator that balances practicality with modern convenience. This top-freezer model has become a favorite among homeowners due to its thoughtful design and array of features.

One of the standout characteristics of the WRT111SFAF is its capacity. With a generous storage space, this refrigerator allows users to store a significant amount of food and beverages, accommodating the needs of families and individuals alike. The top-freezer design provides easy access to frequently used items in the fresh food compartment while also offering ample frozen storage below.

Energy efficiency is a priority in today’s appliances, and the Whirlpool WRT111SFAF does not disappoint. It is designed to minimize energy consumption, often qualifying for energy-saving programs. This not only reduces the environmental impact but also results in lower utility bills, making it an economical option over time.

The interior of the refrigerator is designed to enhance organization and accessibility. It features adjustable shelves that can be moved to accommodate taller items, providing flexible storage options. Additionally, the door bins can hold gallon-sized containers, ensuring that frequently used beverages are easily accessible.

Whirlpool's adjustable temperature control allows users to set the optimal temperature for their food, ensuring items are kept fresh longer. The crisper drawers are designed specifically for fruits and vegetables, helping maintain their freshness by controlling humidity levels.

Innovative technologies are also a key aspect of the WRT111SFAF. The exterior features of this model include textured finishes that resist fingerprints and smudges, making maintenance a breeze. The unit operates quietly, thanks to Whirlpool's commitment to producing appliances that run smoothly without disrupting the home environment.

Overall, the Whirlpool WRT111SFAF is a well-rounded refrigerator that embodies efficiency, flexibility, and convenience. Its combination of smart design, energy savings, and functional features make it a worthwhile addition to any home. Whether you need extra storage for a growing family or simply want to keep your groceries organized, this refrigerator stands out as a dependable choice.
Top Page Image Contents