Cisco Systems 2.7 warranty Next Step-Configuration, Powering On the Wlse

Chapter 3 Installing WLSE 1130-19 Hardware

Next Step—Configuration

Powering On the WLSE

To turn the WLSE’s power on, press the power switch. To turn its power off, press and hold the power switch for at least four seconds. See Figure 1-1 on page 1-3for the location of the power switch.

The system begins booting and sending messages to the console window. When the login prompt appears, you can configure the system.

Next Step—Configuration

Run the setup program and perform basic configuration—See Chapter 4, “Basic Setup—CiscoWorks1105/1130/1130-19.”

	Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
3-16	78-16345-01