Appendix A Installing
Upgrade Methods
www.cisco.com/en/US/products/sw/cscowork/ps3915/prod_upgrades_and_down loads.html
If you already have a recovery CD with the release of the WLSE software you want to install, you can use the CD to upgrade your WLSE. Two methods for upgrading from the Recovery CD are provided in this section:
•Reimaging the
•Reimaging the
Note Although every effort has been made to validate the accuracy of the software version on the recovery CD, you must review WLSE software versions on Cisco.com and download and install any required earlier updates. For information on installing such updates, see the readme files that accompany software updates on Cisco.com.
Caution This procedure will destroy all data and install a new image, and you will have to replace the data by restoring a backup. For information on backups, see the online help or the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.
Reimaging the WLSE—Local Installation Method
Note Although every effort has been made to validate the accuracy of the software version on the Recovery CD, you must review the WLSE’s software versions on http://www.cisco.com and download any necessary software updates. See the Readme files included with the updates to perform the update procedure.
Caution This procedure will destroy all data and install a new image. You will need to replace the data by restoring a backup. For more information, see the online help or the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.
| Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine |
|
