Appendix A Installing Software—CiscoWorks 1105/1130/1130-19

Upgrade Methods

install:install list

Step 5 Enter the following command to install the software:

install:install update package

where package is the name of the software image to be installed. For example, if the ZIP file is called WLSE-2.5-K9.zip, the package name is WLSE-2.5-K9.

Result: The WLSE is reimaged and reboots.

Related CLI Commands

To delete images from the WLSE’s local repository, use the following command:

repository delete [ package all ]

where all deletes all images in the local repository, and package deletes the named image only.

To change the status of the WLSE’s local repository, use the following command:

repository server [ stop start status ]

to stop, start, or display the status of the local repository. You can stop the repository if you are not using it or if you have security concerns. The repository will automatically restart if you reboot the WLSE.

Upgrading from the Recovery CD

You can use this method to upgrade from 1.x versions or 2.0.x versions to 2.7.

You can also use the recovery CD to downgrade to an earlier version

Note You cannot restore a backup from a WLSE 1130-19 or WLSE 1130 to a WLSE 1105.

You can create a recovery CD by downloading the image from cisco.com at the following URL:

 

Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine

78-16345-01

A-11

Page 131
Image 131
Cisco Systems 2.7 warranty Upgrading from the Recovery CD, Related CLI Commands