Chapter 3 Installing WLSE 1130-19 Hardware

Installing the WLSE 1130-19 in a Rack

g.See Figure 3-12. Push the server to the closed position. If the cable is too heavy to carry the server, use a screwdriver to adjust the cam so that the cable management arm is horizontal.

Figure 3-12 Fastening the Server into the Rack

99539

Warning This product relies on the building’s installation for short-circuit (overcurrent)

protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL). Statement 1005

 

Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine

3-14

78-16345-01

Page 62
Image 62
Cisco Systems 2.7 warranty Fastening the Server into the Rack