Chapter 6 Setting Up Discovery and Device Management—CiscoWorks 1105/1130/1130-19

Adding AAA Servers to the WLSE

Adding AAA Servers to the WLSE

Use the following procedure to add information about all AAA servers to be monitored by the WLSE. For information about configuring an AAA server for monitoring, see Setting Up AAA Servers, page 5-25.

Step 1

Select Devices > Discover > AAA Server.

Step 2

Select the server type: EAP-MD5, LEAP, PEAP, or RADIUS.

Step 3

Complete the following:

 

 

 

 

Text Box

Description

 

 

 

 

Server Name

Hostname or IP address of an AAA server to be added.

 

 

Note Depending on how your network is set up, the AAA

 

 

server can be a Cisco Secure Access Control Server or

 

 

a Cisco Access Registrar RADIUS server.

 

 

 

 

Server Port

Port on the server used for authentication; use port 1645.

 

 

 

 

Username

Client username that you entered on the AAA server.

 

 

 

 

Password

Client password that you entered on the AAA server.

 

 

 

 

Secret

Shared secret key that you entered on the AAA server.

 

 

 

Step 4

Click Save.

 

Step 5

Repeat Steps 2-4 for each AAA server you want to add.

 

 

 

For more information on AAA servers, see the WLSE online help.

 

Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine

6-6

78-16345-01

Page 112
Image 112
Cisco Systems 2.7 warranty Adding AAA Servers to the Wlse, Select Devices Discover AAA Server, Text Box Description