Chapter 5 Setting Up
Setting Up IOS Access Points
Step 9 The WDS access point must also register and authenticate itself to the WDS to
participate in the SWAN hierarchy; therefore, the WDS AP is also an infrastructure AP. To configure the WDS access point as an infrastructure access point:
wlccp ap username username password password
Note To configure authentication for wireless clients, see the relevant AP documentation.
Using a WLSE Configuration Template to Configure WDS Access Points
You can use the WLSE to configure one or more WDS access points.
The major configuration steps are:
•Create a configuration template to set up AAA servers and the WDS.
•Apply the configuration template to the appropriate access points by running a configuration job.
To configure WDS access points by using a WLSE configuration template:
Step 1 Log in to the WLSE web interface.
Step 2 Select Configure > Templates.
a.Enter a template name, selecting IOS as the template type.
b.Click Create New.
Step 3 Enter the AAA servers for LEAP authenticating the infrastructure access points and the WLSE to the WDS, and the AAA servers for authenticating wireless client devices:
a.Select Security > Server Manager.
b.In the Corporate Servers section, for each server, enter the IP address, select RADIUS, and enter the shared secret.
c.Click Save.
Step 4 Select Wireless Services > WDS to configure the WDS parameters.
| Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine |
|
