Wlse Without a DNS Server, page 4-6 before | Cisco Systems 2.7

Chapter 4 Basic Setup—CiscoWorks 1105/1130/1130-19

Configuring the WLSE’s Network Information

Table 4-2 General Configuration (continued)

Prompt	Response Description	Sample Response

DNS server IP	IP address of DNS server for name/address resolution.	209.165.201.1
address:	The setup program does not validate the IP address you
	enter.
	If you are not using a DNS server, see Configuring the
	WLSE Without a DNS Server, page 4-6 before
	proceeding.

Would you like to save	• Enter yes to save the configuration. The
this configuration?	configuration is saved and system reboots.
[yes]:	• Enter no to exit without saving configuration and
	• Enter no to exit without saving configuration and
	run setup program again.

Step 5 Answer the next set of prompts to create a self-signed certificate as described in Table 4-3. This certificate will allow you to access the WLSE securely, using HTTPS, until you are able to obtain a certificate from a certificate authority (CA). To make changes in the certificate after running setup, see Changing the Configuration After Running Setup, page 4-5.

The certificate expires after one year. To obtain a permanent, signed certificate, see the SSL instructions in the online help or in the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.

Table 4-3 Self-Signed Certificate Creation

Prompt			Response Description	Sample Response

Country Name			2-character code.	US

State or Province Name			Full name of a state or province.	Snake Desert

Locality Name			City or locality name.	Snake Town

Organization Name			Company name.	Snake Oil, LTD.

Organizational Unit			Unit of the company that is using the WLSE.	Webserver Team

Common Name			Fully qualified domain name (FQDN).	www.snakeoil.com

Email Address			Email address.	www@snakeoil.com

		Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine

4-4				78-16345-01

Image 68

Cisco Systems 2.7 warranty Wlse Without a DNS Server, page 4-6 before, Prompt Response Description Sample Response

Contents

Corporate Headquarters Copyright 2004 Cisco Systems, Inc. All rights reserved N T E N T S Iii Safety Verifying the Configuration Setting Up Discovery and Device Management-CiscoWorks Quick Reference A-4 Vii Viii Cisco 90-Day Limited Hardware Warranty Terms To Receive a Return Materials Authorization RMA Number Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware Cisco 90-Day Limited Hardware Warranty Terms Xii Preface Audience ConventionsConvention Xiv Bewaar Deze Instructies Warnung Wichtige Sicherheitshinweise Xvi Avvertenza Importanti Istruzioni Sulla Sicurezza Xvii Guarde Estas Instrucciones Xviii Xix Product Documentation Document Title Description Cw1105/wlse/27/index.htm Xxi Obtaining Documentation Cisco.comOrdering Documentation Xxii Cisco TAC Website Documentation FeedbackObtaining Technical Assistance Xxiv Opening a TAC CaseTAC Case Priority Definitions Obtaining Additional Publications and Information Xxvi Installation and Use Supplemental License Agreement Xxviii Software Upgrades, Major and Minor ReleasesReproduction and Distribution Product Overview Software Features Hardware Features-WLSE1130-19 Front Panel Features System Indicators Indicator Color Function Back Panel Features 2shows the Wlse back panel Shell Pin Signal DefinitionSerial/Console Port Ethernet Connectors Network Cable Requirements Equipment Included in the Package Preparing to Install Wlse Hardware Safety Preparing to Install Wlse 1130-19 Hardware Safety 78-16345-01 General Precautions Maintaining Safety with Electricity Protecting Against Electrostatic Discharge Environmental Preparing Your Site for InstallationPreventing EMI Choosing a Site for Installation Grounding the System Creating a Safe Environment AC PowerCabling Precautions for Rack-Mounting Preparing to Install Wlse 1130-19 Hardware Tools and Equipment Required for Installation Next Step Installing Wlse 1130-19Hardware Installation Quick Reference Installing the Wlse 1130-19 in a Rack 78-16345-01 Rack Rail Components Removing the Server Rail Telescoping the Rail Attaching Front Rail to the Rack See -5. Attach the back end of the rail to the rack Attaching Screws to Telescopic Rail Attaching Chassis to Rail See -8. Insert the chassis in the rack 10 Attaching Management Arm 11 Installing Cable in Management Arm 12 Fastening the Server into the Rack Cable Connecting to the AC Power SourceConnecting Cables Next Step-Configuration Powering On the Wlse Initial Setup Quick Reference Basic Setup-CiscoWorks 1105/1130/1130-19 Running the Setup Program Configuring the WLSE’s Network InformationGuidelines for Using the Setup Program IP address of default router 209.165.200.224 Prompt Response Description Wlse Without a DNS Server, page 4-6 before Prompt Response Description Sample Response Changing the Configuration After Running Setup Mailroute hostname ip-address No ip name-server ip-address Configuring Name ResolutionConfiguring the Wlse Without a DNS Server Verifying the Configuration # nslookup dns-name Configuring the Web Browser Supported Browsers Configuring Internet Explorer Select Enable for Scripting of Java appletsClient Operating System Supported Browsers Select Tools Internet Options Configuring Netscape Navigator Select Edit Preferences Select Enable all cookies Logging into the Web Interface and Verifying Connectivity Http//209.165.202.1281741 Select Administration User Admin Manage UsersAdding Users Next Steps-Set Up Devices and Configure Device Management 78-16345-01 Setting Up Non-IOS Access Points and Bridges Cisco Discovery Protocol and select Set Up Using the Web InterfaceTasks Procedure Click Security Click User Manager Basic Network Management Setup-IOS Devices Setting Up IOS Access PointsSet Up Using a Wlse Configuration Template Using the AP CLI for Network Management Setup Configure the read-only community Using the AP Web Interface for Network Management Set Up Select Services Snmp Select Services Telnet/SSH Enable Secure ShellSelect Services Telnet/SSH Select Read-Only Select Read-Write Radio Management Setup-IOS Devices About Configuring Authentication About WDS Devices Radio Management Setup Quick Reference Using Access Points as WDS Devices Select Wireless Services WDS Select Configure Wireless Network Manager Under Use Group For, select Infrastructure Authentication Select Wireless Services AP Define a server group for infrastructure authentication Select Security Server Manager Select Configure TemplatesClick Create New Select Wireless Services AP Configuration Using a Wireless LAN Services Module WSM as the WDS Device Using the Web Interface to Configure Infrastructure APs Wlccp ap username username password password Configuring Scanning APs Configuring a Scanning AP-Using the AP CLI Configuring the Wlse Confirming the Configuration Using the Web-based Interface to Validate the Configuration Select Wireless Services WDS WDS Status Setting Up Routers and Switches Task ProcedureSnmp community communitystring ro command Mode and use the set snmp community read-only Setting Up AAA Servers Hostname nameSnmp contact contact Snmp location location Procedure Field Description 78-16345-01 Device Management Quick Reference Tasks References Adding Device Credentials to the Wlse Select Devices Discover Device Credentials Snmp Communities Enter Http Credentials for Non-IOS Access Points Enter Telnet or SSH Credentials for IOS Access Points Enter Http Port Settings for IOS Access Points Enter Wlccp Credentials for Wireless Domain Services WDS Text Box Description Adding AAA Servers to the WlseSelect Devices Discover AAA Server Select Devices Discover Discover Advanced Options Configuring Discovery OptionsDiscovering Devices Run CDP Discovery Run CDP Discovery Now 78-16345-01 Modify the CDP Discovery Schedule Import Devices Import Devices from a File Import Devices from a CiscoWorks Server Managing Devices Select Devices Discover Managed Devices Next Step Installing Software-CiscoWorks 1105/1130/1130-19 Backing Up the Wlse Upgrade VersionsDownloading the Upgrade Image Upgrade Methods Quick Reference Upgrading by Using the Web InterfaceInstalling from the Local Repository Select Administration Appliance Software Define Repository Field Data to Enter Installing from a Windows Server Upgrading by Using the CLI Appliance Software Status View Log Create the Repository Create a Local Repository Create a Repository on a Windows Server Install the Software Upgrading from the Recovery CD Related CLI Commands Reimaging the WLSE-Local Installation Method At the following prompt, enter yes to start the Recovery CD Reimaging the WLSE-Remote Installation Method Technical Specifications CiscoWorks Component Specifications Appendix B Technical Specifications- CiscoWorks D E IN-1 WDS IN-2 CDP IN-3 IN-4 IN-5 Snmp IN-6 IN-7 IN-8