Chapter5 Setting Up Devices—CiscoWorks 1105/1130/1130-19
Setting Up IOS Access Points
5-14
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
b. Enter a server group name.
c. From the Priority lists, select the appropriate AAA servers.
If no AAA servers have been entered, click Define Servers to add the servers,
then select the appropriate servers. Consult the AP online help for assistance
in entering AAA servers into the AP.
d. Under Use Group For, select Infrastructure Authentication.
Step8 Configure the WDS AP to authenticate itself to the WDS so that it can participate
in the SWAN hierarchy:
a. Select Wireless Services > AP.
b. Select Enable.
c. Enter a username and password that can be LEAP authenticated by the AAA
servers in the infrastructure server group.
Step9 To commit the configuration, click Apply.
Note To configure authentication for wireless clients, see the AP documentation.
Using the CLI Interface to Configure WDS Access Points
Tip Consult the IOS and access point documentation for details on the subtleties of
IOS commands.
The key steps in configuring the WDS are:
•Configure AAA servers to authenticate SWAN infrastructure access points
and the WLSE.
•Configure WDS.
•Configure the WNM.