3-15
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
Chapter3 Installing WLSE 1130-19 Ha rdware
Installing the WLSE 1130-19 in a Rack
Connecting to the AC Power Source
Warning
This equipment must be grounded. Never defeat the gr ound conductor or
operate
the equipment in the absence of a suitably installed ground conductor.
Contact
the appropriate electrical inspection authority or an electrician if you are uncertain
that suitable grounding is available.
Statement 1024
Connect the AC power receptacle to the AC power source with the provided power
cable.
Connecting Cables
Use unshielded twisted pair (UTP) copper wire Etherne t cable, with standard
RJ-45 compatible plugs, to connect the WLSE to the network.
To connect the cables:
Step 1 Plug the network connection into the Ethernet 0 port. See Figure 1-2 on page 1-5
for the location of the Ethernet 0 port
Step2 Connect a c onsole to the console/serial port using the supplied serial cable and, if
necessary, the DB-9-to-RJ-45 console adapter. See Figure 1-2 on page 1-5 for the
location of the serial port.
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity.