Citrix Systems 6 manual Patch Update Commands, Network-create, Network-destroy, Patch Parameters

Parameter Name	Description	Type
other-config:ethtool-	set to no to disable autonegotiation of the	read write
autoneg	physical interface or bridge. Default is yes.
other-config:ethtool-rx	set to on to enable receive checksum, off	read write
	to disable
other-config:ethtool-tx	set to on to enable transmit checksum, off	read write
	to disable
other-config:ethtool-sg	set to on to enable scatter gather, off to	read write
	disable
other-config:ethtool-tso	set to on to enable tcp segmentation	read write
	offload, off to disable
other-config:ethtool-ufo	set to on to enable UDP fragment offload,	read write
	off to disable
other-config:ethtool-gso	set to on to enable generic segmentation	read write
	offload, off to disable
blobs	Binary data store	read only

network-create

network-createname-label=<name_for_network>[name-description=<descriptive_text>]

Creates a new network.

network-destroy

network-destroy uuid=<network_uuid>

Destroys an existing network.

Patch (Update) Commands

Commands for working with XenServer host patches (updates). These are for the standard non-OEM editions of XenServer for commands relating to updating the OEM edition of XenServer, see the section called “Update Commands” for details.

The patch objects can be listed with the standard object listing command (xe patch-list), and the parameters manipulated with the standard parameter commands. See the section called “Low-level Parameter Commands” for details.

Patch Parameters

Patches have the following parameters:

Parameter Name	Description	Type
uuid	The unique identifier/object reference for	read only
	the patch
host-uuid	The unique identifier for the XenServer host	read only
	to query

138