Whirlpool ST21PKXJW00 manual Installing Your Refrigerator, Unpacking Your Refrigerator

Page 4

INSTALLING YOUR

REFRIGERATOR

Unpacking Your Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove shelves from the shipping position (shelves are shipped upside down):

IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small pebble-size pieces. This is normal.

NOTE: Glass shelves are heavy. Use special care when removing them to avoid impact from dropping.

1.Grasp the front of the upper shelf with one hand and use the other hand to remove packing material from the shelf area.

2.Lower the front of the upper shelf until shelf hooks can be removed from the shelf supports and pull the shelf forward.

3.Flip the shelf over and insert the rear shelf hooks into the shelf supports. Tilt the front of shelf up until rear shelf hooks drop into the shelf supports.

4.Lower the front of the shelf and check to make sure that it is securely in position.

Removing packaging materials

Remove tape and any labels from your refrigerator before using (except the model and serial number label).

To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety” section.

On some models, shelves, bins, door shelf rails, and other feature parts may be packaged in the Interior FeaturePak. Follow the instructions contained in the package for proper assembly.

IMPORTANT:

Depending on your model, do not remove any permanent instruction labels inside your refrigerator or the Tech Sheet that is fastened behind the base grille.

Depending on your model, do not remove the white Styrofoam insert that is located behind the control panel on the ceiling of the refrigerator. The insert is part of the refrigerator and not part of the packing material. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Space Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a .5 in. (1.25 cm) space on each side and at the top.

.5" (1.25 cm)

2" (5.08 cm)

If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. The refrigerator can be flush against the back wall if you do not have an ice maker installed.

If you are installing your refrigerator next to a fixed wall, leave 2 in. (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

4

Image 4
Contents TOP-MOUNT Refrigerator Table of Contents Refrigeratorsafety Before you throw away your old refrigerator or freezerInstalling Your Refrigerator Unpacking Your RefrigeratorSpace Requirements Removing packaging materialsConnecting the Refrigerator To a Water Source Electrical RequirementsRecommended grounding method Read all directions carefully before you beginConnecting to refrigerator Base GrilleTo remove the base grille To replace the base grilleDoor Removal Replacement Door Closing and Alignment Using Your Refrigerator Understanding Sounds You May HearEnsuring Proper Air Circulation Door AlignmentSetting the Controls Adjusting Control SettingsFor models with two controls For models with a single controlRefrigerator Shelves Lateral Adjustable ShelfSlide-out Shelves on some models Chilled Meat Drawer Meat Drawer and CoverMeat storage guide Crisper and Crisper Cover Utility or Egg BinCrisper Humidity Control Wine or Can/Bottle RackFreezer Shelf Ice MakerFrozen food storage guide Door Features Cleaning Your Refrigerator To clean your refrigeratorCaring for Your Refrigerator Flip-up Door ShelfPower Interruptions TroubleshootingVacation and Moving Care Temperature is too warm There is water in the defrost drain panMotor seems to run too much Refrigerator seems to make too much noiseU.S.A Refrigerator Warranty Whirlpool Corporation will not pay for11/99 2205261

ST21PKXJW00 specifications

The Whirlpool ST21PKXJW00 is an advanced top-freezer refrigerator designed to enhance kitchen functionality while ensuring food preservation. With a sleek exterior and spacious interior, it offers a blend of style and practicality, ideal for modern households.

One of the standout features of this model is its Total No Frost technology. Unlike traditional refrigerators that require periodic defrosting, the ST21PKXJW00 uses a fan-assisted cooling system to maintain consistent temperatures throughout the fridge and freezer compartments. This not only prevents frost buildup but also ensures your food stays fresh for longer by minimizing temperature fluctuations.

The refrigerator boasts a generous storage capacity, providing ample space for all your groceries. Adjustable shelves in the refrigerator compartment allow for flexible organization, accommodating larger items with ease. The fridge also includes clear vegetable and fruit crisper drawers that help maintain optimal humidity levels, keeping your produce crisp and fresh.

In addition to its storage capabilities, the ST21PKXJW00 features energy-efficient LED lighting that illuminates the interior without generating excess heat. This not only enhances visibility but also contributes to the unit’s overall energy efficiency, making it an eco-friendly choice for environmentally conscious consumers.

The unit incorporates the Adaptive Intelligence technology, which learns your usage patterns and adjusts the cooling settings accordingly. This smart feature not only maximizes energy savings but also helps maintain ideal storage conditions based on your individual needs.

With regard to overall aesthetics, the Whirlpool ST21PKXJW00 comes in a sleek stainless steel finish that seamlessly fits into any kitchen décor. Its minimalist design and high-quality material make it not only functional but also a stylish addition to your home.

Maintenance is made simple, with easy-to-clean surfaces and removable door seals, ensuring that hygiene and convenience are never compromised. Moreover, the refrigerator operates quietly, enhancing the overall comfort of your kitchen environment.

In conclusion, the Whirlpool ST21PKXJW00 combines innovative technology with practical features, making it a reliable choice for families looking to upgrade their refrigeration needs. With its focus on food preservation and energy efficiency, it stands out as a dependable appliance that meets modern culinary demands.