Whirlpool ST21PKXJW00 Electrical Requirements, Connecting the Refrigerator To a Water Source

Page 5

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection:

Recommended grounding method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control, (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Connecting the Refrigerator

to a Water Source

Read all directions carefully before you begin.

IMPORTANT:

■If operating the refrigerator before installing the water connection, turn ice maker to the OFF position to prevent operation without water.

■All installations must be in accordance with local plumbing code requirements.

■Use copper tubing and check for leaks.

■Install copper tubing only in areas where temperatures will remain above freezing.

■It may take up to 24 hours for your ice maker to begin producing ice.

Tools required:

■Standard screwdriver

■⁷⁄₁₆ in. and ¹⁄₂ in. open-end wrenches or two adjustable wrenches

■¹⁄₄ in. nut driver

■¹⁄₄ in. drill bit

■Hand drill or electric drill (properly grounded)

NOTE: Your refrigerator dealer has a kit available with a

¹⁄₄ in. (6.35 mm) saddle-type shut-off valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing- type or ³⁄₁₆ in. (4.76 mm) saddle valve which reduces water flow and clogs more easily.

Cold water supply

The ice maker water valve contains a flow washer which is used as a water pressure regulator. The ice maker needs to be connected to a cold water line with water pressure between 30 and 120 psi. If a problem occurs, call your utility company.

Connecting to water line:

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Locate a ½ in. to 1¹⁄₄ in. (12.7 mm to 3.18 cm) vertical COLD water pipe near the refrigerator.

NOTE: Horizontal pipe will work, but the following procedure

must be followed: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.

4.To determine the length of copper tubing you will need, measure from connection on lower left rear of refrigerator to water pipe. Add 7 ft. (2.1 m) to allow for moving refrigerator for cleaning. Use ¹⁄₄ in. (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5.Using a grounded drill, drill a ¹⁄₄ in. hole in the cold water pipe you have selected.

1.Cold Water Pipe

2.Pipe Clamp

3.Copper Tubing

4.Compression Nut

5.Compression Sleeve

6.Shut-Off Valve

7.Packing Nut

6.Fasten shut-off valve to cold water pipe with pipe clamp. Be sure outlet end is solidly in the ¹⁄₄ in. drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing, especially if soft (coiled) copper tubing is used. Now you are ready to connect the copper tubing.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents TOP-MOUNT Refrigerator Table of Contents Before you throw away your old refrigerator or freezer RefrigeratorsafetyUnpacking Your Refrigerator Installing Your RefrigeratorSpace Requirements Removing packaging materialsElectrical Requirements Connecting the Refrigerator To a Water SourceRecommended grounding method Read all directions carefully before you beginBase Grille Connecting to refrigeratorTo remove the base grille To replace the base grilleDoor Removal Replacement Door Closing and Alignment Understanding Sounds You May Hear Using Your RefrigeratorEnsuring Proper Air Circulation Door AlignmentAdjusting Control Settings Setting the ControlsFor models with two controls For models with a single controlSlide-out Shelves on some models Lateral Adjustable ShelfRefrigerator Shelves Meat storage guide Meat Drawer and CoverChilled Meat Drawer Utility or Egg Bin Crisper and Crisper CoverCrisper Humidity Control Wine or Can/Bottle RackFrozen food storage guide Ice MakerFreezer Shelf Door Features To clean your refrigerator Cleaning Your RefrigeratorCaring for Your Refrigerator Flip-up Door ShelfVacation and Moving Care TroubleshootingPower Interruptions There is water in the defrost drain pan Temperature is too warmMotor seems to run too much Refrigerator seems to make too much noiseU.S.A Whirlpool Corporation will not pay for Refrigerator Warranty11/99 2205261

ST21PKXJW00 specifications

The Whirlpool ST21PKXJW00 is an advanced top-freezer refrigerator designed to enhance kitchen functionality while ensuring food preservation. With a sleek exterior and spacious interior, it offers a blend of style and practicality, ideal for modern households.

One of the standout features of this model is its Total No Frost technology. Unlike traditional refrigerators that require periodic defrosting, the ST21PKXJW00 uses a fan-assisted cooling system to maintain consistent temperatures throughout the fridge and freezer compartments. This not only prevents frost buildup but also ensures your food stays fresh for longer by minimizing temperature fluctuations.

The refrigerator boasts a generous storage capacity, providing ample space for all your groceries. Adjustable shelves in the refrigerator compartment allow for flexible organization, accommodating larger items with ease. The fridge also includes clear vegetable and fruit crisper drawers that help maintain optimal humidity levels, keeping your produce crisp and fresh.

In addition to its storage capabilities, the ST21PKXJW00 features energy-efficient LED lighting that illuminates the interior without generating excess heat. This not only enhances visibility but also contributes to the unit’s overall energy efficiency, making it an eco-friendly choice for environmentally conscious consumers.

The unit incorporates the Adaptive Intelligence technology, which learns your usage patterns and adjusts the cooling settings accordingly. This smart feature not only maximizes energy savings but also helps maintain ideal storage conditions based on your individual needs.

With regard to overall aesthetics, the Whirlpool ST21PKXJW00 comes in a sleek stainless steel finish that seamlessly fits into any kitchen décor. Its minimalist design and high-quality material make it not only functional but also a stylish addition to your home.

Maintenance is made simple, with easy-to-clean surfaces and removable door seals, ensuring that hygiene and convenience are never compromised. Moreover, the refrigerator operates quietly, enhancing the overall comfort of your kitchen environment.

In conclusion, the Whirlpool ST21PKXJW00 combines innovative technology with practical features, making it a reliable choice for families looking to upgrade their refrigeration needs. With its focus on food preservation and energy efficiency, it stands out as a dependable appliance that meets modern culinary demands.
Top Page Image Contents