Whirlpool RT17DK, RT17EK Changing the control, Settings, Removing the drop-in, Door trim pieces

Changing the control

If you need to adjust temperatures in the refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number. (See page 23.)

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjust- ments.

l Then adjust the Freezer Control if needed.

CONDITION:		REASON:
Refrigerator		. Door		opened		often
section		9 Large		amount		of food added
too	warm	l	Room	temperature			too warm
Freezer		l	Door	opened		often
section		l	Large	amount		of food added
too	warm	l Very cold room temperature
			(can’t	cycle	often		enough)
Refrigerator		l	Controls not		set correctly for
section			your conditions
too	cold
Ice not		. Heavy		ice usage
made fast		l Very cold room temperature
enough			(can’t	cycle	often		enough)
Both	sections	l	Door	opened		often
too	warm	l	Large	amount		of food added
		l Very warm or very cold room
			temperatures

RECOMMENDED CONTROL SETTINGS:

Refrigerator Freezer

Qi z g

[i ,, iQ

(ji ,, y

Qi 1 ;Q

Removing the drop-in

To remove the trim piece:

1.Remove all items from the shelf.

2.Pull straight up on the trim piece at each end.

To replace the trim piece:

1.Locate each end of the trim piece above the trim pocket opening.

2.Push the trim piece straight down until it stops.

3.Replace items on the shelf.

door trim pieces

4

)

9