Whirlpool ST14CKXKQ00 manual Water Supply Connection, Connecting to Water Line, Style

Page 8

Style 1

5. Using a grounded drill, drill a ¹⁄₄ in. (6.35 mm) hole in the cold

 

water pipe you have selected.

Style 2

3.Depending on your model, to level your refrigerator you may either turn the screw clockwise to raise that side of the refrigerator or turn the screw counterclockwise to lower that side. Place a level on top of the refrigerator to check adjustments.

4.If the doors do not close on their own, you will need to raise the front of the refrigerator so it is slightly higher than the back. To do this, turn both leveling screws clockwise ¹⁄₂ turn.

IMPORTANT: Be sure to turn both screws an equal amount or the refrigerator will no longer be level side to side.

5.Open doors and check that they close automatically. If not, repeat steps 3 and 4.

6.Using a level, check to see that the refrigerator is still level side to side. Readjust if necessary.

Water Supply Connection

(on some models)

Read all directions carefully before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connecting to Water Line:

1.Unplug refrigerator or disconnect power.

2.Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.

3.Find a ¹⁄₂ in. (1.27 cm) to 1¹⁄₄ in. (3.18 cm) vertical COLD water pipe near the refrigerator.

NOTE: Horizontal pipe will work, but the following procedure

must be followed: Drill on the top side of the pipe, not the bottom. This will help keep water away from the drill. This also keeps normal sediment from collecting in the valve.

4.To determine the length of copper tubing you will need, measure from connection on lower left rear of refrigerator to water pipe. Add 7 ft (2.1 m) to allow for moving refrigerator for cleaning. Use ¹⁄₄ in. (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

1.

Cold Water Pipe

5.

Compression Sleeve

2.

Pipe Clamp

6.

Shutoff Valve

3.

Copper Tubing

7.

Packing Nut

4.Compression Nut

6.Fasten shutoff valve to cold water pipe with pipe clamp. Be sure outlet end is solidly in the ¹⁄₄ in. (6.35 mm) drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing, especially if soft (coiled) copper tubing is used. Now you are ready to connect the copper tubing.

7.Slip compression sleeve and compression nut on copper tubing as shown. Insert end of tubing into outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing into a container or sink, and turn ON main water supply and flush out tubing until water is clear. Turn OFF shutoff valve on the water pipe. Coil copper tubing.

Connecting to Refrigerator:

NOTE: The first step for connecting the water line to your refrigerator is different depending on the type of water valve provided with your refrigerator. See the diagrams below to determine the style of valve you have. (On kit models, assemble water valve to refrigerator per kit instructions.)

1.For Style 1, disconnect the tube clamp on the back of the product and insert the copper tubing through the clamp, as shown. Remove the tape label from the valve inlet and insert copper tubing until it bottoms out (approximately ³⁄₄ in.

[1.9 cm]). Tighten nut by hand as much as possible; then turn the nut an additional ¹⁄₂ turn using a wrench. Do not overtighten. Reattach the tube clamp and tube to the back of the cabinet. Skip to Step 2.

For Style 2, disconnect the tube clamp on the back of the product and insert copper tubing through the clamp as shown. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Reattach the tube clamp and tube to the back of the cabinet. Move to Step 2.

2.Turn shutoff valve ON. Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

Style 1

1.

Tube Clamp

3.

Compression Nut

2.

Copper Tubing

4.

Valve Inlet

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 2262175 TOP-MOUNT RefrigeratorUse & Care Guide Table of Contents Refrigerator Safety Before you throw away your old refrigerator or freezerInstallation Instructions Cleaning before useUnpacking Location RequirementsElectrical Requirements Water Supply RequirementsRecommended grounding method Water PressureDoor Removal Replacement Door Swing Reversal optional Door and Hinge Replacement Door ClosingDoor and Hinge Removal Door Reversal optionalConnecting to Water Line Connecting to RefrigeratorWater Supply Connection StyleUsing the Controls Mid-settingRefrigerator USE Normal SoundsAdjusting Controls Ice MakerRefrigerator Shelves To turn the ice maker on/offMeat Drawer and Cover Crisper and Crisper CoverUtility or Egg Bin Meat storage guideDoor Features CleaningRefrigerator Care Freezer ShelfPower Interruptions Changing the Light BulbVacation and Moving Care If you choose to turn the refrigerator off before you leaveTroubleshooting If you need replacement parts U.S.AFor further assistance Our consultants provide assistance with2262175 Refrigerator WarrantyWhirlpool Corporation will not pay for

ST14CKXKQ00 specifications

The Whirlpool ST14CKXKQ00 is a remarkable refrigerator designed to meet the diverse needs of modern households. With its sleek aesthetic and advanced technology, this appliance is engineered to enhance kitchen efficiency and preserve food freshness.

One of the standout features of the ST14CKXKQ00 is its innovative storage solutions. The refrigerator boasts adjustable shelves that allow users to customize the space according to their requirements. This flexibility ensures that large items can be accommodated easily, while smaller items are organized efficiently. Additionally, the door bins are designed to hold gallon-sized containers, minimizing the hassle of searching for items and maximizing space utilization.

In terms of cooling technology, Whirlpool has incorporated its advanced Adaptive Defrost system in the ST14CKXKQ00. This intelligent feature optimizes defrosting cycles based on usage patterns, which not only improves energy efficiency but also maintains consistent temperatures. As a result, food items stay fresher for longer periods, reducing waste.

Another notable characteristic of this refrigerator is its Energy Star certification. The ST14CKXKQ00 is engineered to operate with minimal energy consumption, making it an eco-friendly choice. This certification not only lowers utility bills but also contributes to environmental sustainability, which is increasingly important for many consumers.

The fresh food compartment of the ST14CKXKQ00 is equipped with humidity-controlled crisper drawers. These drawers create an ideal environment for fruits and vegetables, keeping them crisp and flavorful over extended periods. Moreover, the refrigerator features bright LED lighting, which illuminates the interior effectively, making it easy to find items even in low-light conditions.

Furthermore, the ST14CKXKQ00 includes a user-friendly temperature control system that allows for precise adjustments. Whether setting the ideal temperature for dairy products or ensuring that leftovers remain safe, this feature adds convenience to daily use.

In conclusion, the Whirlpool ST14CKXKQ00 stands out in the competitive world of home appliances with its blend of functionality, energy efficiency, and smart design. With its innovative storage options, advanced cooling technologies, and attention to food preservation, this refrigerator is an excellent addition to any kitchen, catering to the needs of families and individuals alike.
Top Page Image Contents