Installing it properly
1.Allow 3 inches (7.5 cm) between over- head cabinets and refrigerator top.
2.Allow at least 1 inch (2.5 cm) between the refrigerator condenser on the back and
the wall. | JUI I |
3.Allow 1/2inch (1.25 cm) on each side of the refrigerator for ease of installation.
4.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
5.Level vour refriaerator.
Leveling it
Your refrigerator has two front, adjustable rollers to prevent rocking on uneven floors.
To adjust rollers:
1.Roll refrigerator into position.
2.Adjust rollers by turning the leveling screws, located at the front of the base. l Turn clockwise to raise.
l Turn counterclockwise to lower.
NOTE: Rollers are adjusted correctly when the refrigerator no longer rocks when the doors are opened or closed.
3.Repeat this procedure whenever the refrigerator is moved.
NOTE: If you want the doors to close easier, use the rollers to raise the front of the refrigerator slightly.
Rlght to ralse; left to lower
I I Use a screwdrlver to adjust
Vlew of roller wlth hlnge In place
Lelellng screw
6C
WITHOUESTIONSON COMMENTS