Whirlpool SB160PED warranty Electronic oven control, Display/clock, Command buttons

The electronic oven control

Display (see below)

Cancel button

(P. 12)

Timer on/off button

(P. 12)

Clock	Bake time	Stop-time	Clean-button	Broil button	Bake temp
button	button	button	(P. 26)	(P. 16)	button (p. 14)
(P. 11)	(P. 20)	(P. 22)

Display/clock

l When you first plug in the oven, the time display will flash until you set a new time. If, after you set the clock (page 1l), the time display again flashes, your electricity was off for a while. Reset the clock.

l When you are not using the oven, the control is an accurate clock.

l When you are using the oven or Minute Timer, the display will show times, tem- perature settings, and what command buttons have been pressed.

l When showing the time of day, the display will show the hour and minutes.

l When you are using the Minute Timer, the display will show minutes and seconds in the following sequence:

-For settings from 0 to 1 minute 55 seconds, the display will increase in Ssecond amounts and count down each second.

-For settings from 2 minutes to 9 minutes 50 seconds, the display will increase in 1O-second amounts and count down each second.

-For settings from 10 to 59 minutes, the display will increase in 1-minute amounts and count down each second.

-For settings from 1 hour to 1 hour 55 minutes, the display will increase in Sminute amounts and count down each minute.

IO

-For settings from 2 hours to 9 hours 55 minutes, the display will increase in 1O-minute amounts and count down each minute.

l When you are using Bake Time, . , the display will show hours and - minutes.

0

I!!!!

Command buttons

The command buttons tell the oven what to do and in what order. A few examples: -Clock tells the oven you are going to set

the clock.

-Cancel tells the oven to turn off.

Each command button (except Cancel) has its own Indicator Light on the display. The Indicator Light comes on when you press the command button.