Installation Instructions, Remove Oven Trim

■Models rated from 7.3 to 9.6 kW at 240 volts (5.5 to 7.2 kW at 208 volts) require a separate 40-amp circuit. Models rated at 7.2 kW and below at 240 volts (5.4 kW and below at 208 volts) require a separate 30-amp circuit.

■A circuit breaker is recommended.

■Connect directly to the circuit breaker box (or fused disconnect) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See “Make Electrical Connection” section.

■Flexible conduit from the oven should be connected directly to the junction box.

■Do not cut the conduit. The length of conduit provided is for serviceability of the oven.

■A UL listed or CSA approved conduit connector must be provided.

■If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

INSTALLATION INSTRUCTIONS

Prepare Built-In Oven

1.Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation.

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

2.To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting.

3.Remove the shipping materials and tape from the oven.

4.Remove the hardware package from inside the bag containing literature.

5.Remove and set aside racks and other parts from inside the oven.

6.Move oven and cardboard close to the oven’s final location.

3.Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door(s) aside on a covered work surface.

Remove Oven Trim

1.Side trims are located on the right side of the oven. Cut the cable tie and remove side trims.

2.Remove the cable tie from the side of the oven.

NOTE: Screws for attaching side trims (after oven is installed in cabinet) are in a screw bag inside the package containing literature.

Remove Oven Door

IMPORTANT: Use both hands to remove oven door(s).

1.Open the oven door.

2.Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position.

A. Oven door latch in locked	B. Oven door latch in unlocked
position	position

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together.

1.Disconnect power.

2.Feed the flexible conduit from the oven through the opening in the cabinet.

RBS277PV specifications

The Whirlpool RBS277PV is a built-in wall oven that stands out for its combination of advanced features, innovative technologies, and a sleek design. This model brings together functionality and modern aesthetics, making it a perfect fit for contemporary kitchens.

One of the standout features of the Whirlpool RBS277PV is its True Convection cooking system. This technology circulates hot air throughout the oven, ensuring that food is cooked evenly and quickly. This is particularly beneficial when baking multiple trays of cookies or roasting large cuts of meat, allowing for consistent results without the need to rotate dishes.

The oven has a generous capacity of 27 cubic feet, providing ample space for cooking large meals or multiple dishes at once. This capacity is complemented by the oven’s flexible cooking modes, including Bake, Broil, and Warm, as well as a range of convenient pre-set cooking options. These presets simplify meal preparation, making it easier for users to achieve the desired results with minimal effort.

Another notable characteristic of the RBS277PV is its user-friendly control panel. The modern electronic controls are intuitive, allowing cooks to easily select cooking times, temperatures, and modes. The oven is also equipped with a rapid preheat feature, significantly reducing waiting times before cooking begins, which is a considerable advantage for busy households.

Cleaning the RBS277PV is made simple with its self-cleaning function. This automated feature uses high heat to burn away food residues and spills, saving users time and effort in maintaining their appliance. Additionally, the oven's interior is designed with smooth surfaces that enhance cleaning efficiency.

The appliance’s design embraces a sleek, stainless steel finish that complements a variety of kitchen styles. Its compact form factor makes it ideal for installations where space is limited, yet it does not compromise on capacity or performance.

Connectivity is another innovative feature of the Whirlpool RBS277PV. With smart appliance integration, users can control their oven remotely via a smartphone app, allowing for added convenience and flexibility.

In summary, the Whirlpool RBS277PV wall oven is a perfect blend of innovation and style, providing essential cooking technologies, ample space, and ease of use. With its True Convection system, self-cleaning capabilities, and smart features, it is designed to meet the needs of both casual cooks and culinary enthusiasts alike.