Whirlpool RBD306 manual Clock, Tones, Three tones

ELECTRONICOVENCONTROL

1	2	3	4	5	6
l	i	i	_	I	i

		7		8	9	10	11	12	13 14
1.	Upper Oven Temperature	Display	6.	Oven Light					11.	Hour
2.	Electronic Display		7.	Oven Selector					12.	Minute
3.	Lower Oven Temperature	Display	8.	Oven Settings					13.	Start/Enter [Control Lock]
4.	Timer		9.	Temperature Setting					14.	Off/Cancel
5.	Clock		10. Timed Cooking

When power is first supplied to the appliance, everything on the display will light up for 5 seconds. Then, the time of day and "PF" will appear on the electronic oven display.

Any other time "PF" appears, a power failure occurred. To reset the clock, press UPPER OFF or LOWER OFF on double oven models. On single oven models, press OFF/CANCEL.

Electronic Display

When the oven(s)are in use, this display shows the oven temperature. On double oven models, this display will also show which oven is being set. The left cavity symbol represents the upper oven and the right cavity symbol represents the lower oven.

If "Err" appears on the oven display, an invalid pad was pressed. Press UPPER OFF or LOWER OFF and retry entry. On single oven models, press OFF/CANCEL.

Clock

This is a 12 hour clock and does not show a.m. or p.m.

To Set:

Before setting, make sure the ovens, Timer and Timed Cooking are off.

1.Press CLOCK.

2.Press the HR or MIN "up" or "down" arrow pads to set the time of day.

3.Press CLOCK or START/ENTER.

To remove the time of day from the display: Press and hold CLOCK for 5 seconds.

To return the time of day to the display: Press CLOCK. The time should not have to be reset.

When the ovens are not in use, the display will show the time of day.

Start/l ter

The START/ENTER pad begins any oven function except the Timer. If not pressed within 5 seconds after pressing a pad, "START?" will appear on the oven display as a reminder. If not

pressed within 5 minutes after pressing a pad, the oven display will return to the time of day mode and the programmed function will be cancelled.

Upper Lower Offer Oil]Cancel

The UPPER OFF, LOWER OFF and OFF/CANCEL pads stop their

respective oven functions except for the Clock, Timer and Control Lock.

The cooling fan may continue to operate even after an oven function has been cancelled, depending on the oven temperature.

Tones

Tones are audible signals, indicating the following:

One tone

•Valid pad press

•Oven is preheated

•Function has been entered

Three tones

•Invalidpad press

Four tones

•End-of-cycle

•Reminder, repeating each minute after the end-of-cycle tones

All Tones

All of the above tones are preset on, but can be turned off.

To Turn Off/On: Press and hold STOP TIME for 5 seconds, and a tone will sound. On double ovens only, "Snd oFF" will appear on the oven display for 3 seconds. Repeat to change back to "Snd

on".