Setting the Clock
When the oven is first plugged in, a tone sounds and the display shows 88:88. If the electric power ever goes off, the Display will again show all 8’s when the power comes back on.
You can cook or use the Minute Timer without setting the Clock, but the Display will be blank after cooking.
DO THIS... | THIS HAPPENS... |
1. Touch CLOCK SET.
2.Touch Number Pads for the right time of day.
3.Touch START.
The Display will show a “0” and the colon will start to flash. The first Number Pad must be touched wlthln
5 seconds or the Display will go blank. Touch CLOCK SETagain and continue.
The Display will show what numbers you touched in the order you touched them. This example shows 3:25.
The colon will stop flashing. The Clock is set.
If you have touched in an incorrect time, such as 12:65,“Err”will show on the Display. Touch CLOCK SET and start over.
NOTE: To Etthe Clock, touch CLOCK SET.The current time will show on the Display and the colon will flash. Continue to set the Clock as shown above.