Whirlpool W10541636A important safety instructions Leveling, Cleaning, Interior Components

Page 10

3.Install the white decorative screws on the opposite side of the door.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

Leveling

It is important for the ice maker to be level in order to work properly. Depending upon where you install the ice maker, you may need to make several adjustments to level it. You may also use the leveling legs to lower the height of the ice maker for undercounter installations.

Tools Needed

Gather the required tools and parts before starting installation.

■9" level

■Adjustable wrench

NOTE: It is easier to adjust the leveling legs if you have another person to assist you.

1.Move the ice maker to its final location.

NOTE: If this is a built-in installation, move the ice maker as close as possible to the final location.

2.Place the level on top of the product to see whether the ice maker is level from front to back and side to side.

3.Push up on the top front of the ice maker, and then locate the leveling screws that are on the bottom front of the ice maker.

4.Using an adjustable wrench, change the height of the legs as follows:

■Turn the leveling leg to the right to lower that side of the ice maker.

■Turn the leveling leg to the left to raise that side of the ice maker.

NOTE: The ice maker should not wobble. Use shims to add stability when needed.

5.Push up on the top rear of the ice maker and locate the leveling legs that are on the bottom rear of the ice maker.

6.Follow the instructions in Step 4 to change the height of the legs.

7.Use the level to recheck the ice maker to see that it is even from front to back and side to side. If the ice maker is not level, repeat steps 2 to 5. If the ice maker is level, go to the “Connect Water Supply” section.

Cleaning

Interior Components

1.Unplug ice maker or disconnect power.

2.Open the storage bin door and remove any ice that is in the bin.

3.Remove the drain cap from the water pan and drain thoroughly. Replace the drain cap securely on the water pan. If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice.

4.Pull out on the bottom of the cutter grid cover until the snaps release to remove.

NOTE: On some models, remove the screw from the cutter grid cover.

5.Unplug the wiring harness from the left side of the cutter grid.

A

B

A. Cutter grid cover

B. Screw (on some models)

A

A. Cutter grid cover

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ICE Maker Safety Table of Contents/Table des matièresUnpack the Ice Maker Installation InstructionsCleaning Before Use Location RequirementsVacation or Extended Time Without Use Electrical RequirementsWater Supply Requirements Connect Water SupplyRear View Ice Maker Drain Pump InstallationKit Contains Drain Cap If Ice Maker Is Currently InstalledDrain Pump Installation Water Supply LineDrain Pump Mounting Tab Slot Drain Pump InstalledParts Locations Vent TubeSide View Drain ConnectionGravity Drain System Drain Pump System on some modelsOn Some Models Connecting the DrainIce Maker Door Reversal-Side Swing Only Door Stop and End-Cap ReversalOn Some Models-Replace Door Wrap Reverse HingesReplace Door Top HingeLeveling CleaningInterior Components On Some Models Sécurité DE LA Machine À Glaçons Votre sécurité et celle des autres est très importanteDéballage de la machine à glaçons Instructions D’INSTALLATIONExigences d’emplacement Spécifications électriquesVacances ou longue période d’inutilisation Spécifications de l’alimentation en eauRaccordement à la canalisation d’eau Vue arrière Installation de la pompe de vidange de la Machine à glaçonsContenu de l’ensemble Bouchon de vidange Si la machine à glaçons est installéeInstallation de la pompe de vidange Canalisation d’alimentation en eauTube de vidange Position des piècesVidange par gravité Raccordement au drain de vidangeTube de ventilation Vue latéraleSystème avec pompe de vidange sur certains modèles Raccordement du drain de vidangeInversion du sens de montage des charnières Réinstallation de la porteSur certains modèles Réinstallation du revêtement de porte Charnière supérieureNivellement Inversion du sens dinstallation de la gâche de porteCharnière inférieure Nettoyage Composants intérieursSur certains modèles Imprimé aux É.-U

W10541636A specifications

The Whirlpool W10541636A is a top-tier refrigerator model designed to meet the needs of modern households while providing optimal cooling performance and energy efficiency. This appliance stands out due to its innovative features and advanced technologies that cater to the demands of contemporary living.

One of the main features of the W10541636A is its spacious interior, offering ample storage capacity for all types of food and beverages. The refrigerator is designed with adjustable shelving that allows users to customize the layout according to their needs. The clear drawers make it easy to access vegetables and fruits while maintaining freshness. Furthermore, the sleek design includes door bins that can accommodate large gallon containers, maximizing storage efficiency.

A standout characteristic of this refrigerator is its advanced cooling system. The W10541636A employs Whirlpool's Precision Temperature Control technology, which ensures that food stays at the ideal temperature, reducing spoilage and maintaining flavors. The multi-airflow system distributes cold air more evenly throughout the refrigerator, minimizing temperature fluctuations and ensuring that every shelf remains consistently cool.

Energy efficiency is another key attribute of the W10541636A. It is designed to operate with reduced energy consumption, helping households save on utility bills while being environmentally friendly. This model is ENERGY STAR certified, indicating that it meets strict energy efficiency guidelines set by the EPA.

In terms of convenience, the Whirlpool W10541636A includes features such as an external water and ice dispenser, providing quick access to chilled water and ice without having to open the refrigerator door. The intuitive controls and LED lighting enhance usability, allowing for easy customization of temperature settings and improved visibility, making it effortless to find items inside.

In conclusion, the Whirlpool W10541636A refrigerator combines innovative features, advanced cooling technologies, and energy efficiency to provide consumers with a quality appliance suited for busy lifestyles. Its spacious design, precision cooling systems, and user-friendly characteristics make it a reliable choice for families seeking both functionality and style in their kitchen. Whether storing fresh produce, prepared meals, or beverages, the W10541636A delivers performance that enhances everyday living.
Top Page Image Contents