Whirlpool W10136155B manual Ice Maker Door, Remove door, Reverse Hinges, Replace Door, Top Hinge

Page 7

Ice Maker Door

TOOLS NEEDED:

Gather the required tools and parts before starting installation.

■

⁵⁄₁₆" wrench

■

Flat putty knife

■

¹⁄₄" wrench

■

Phillips screwdriver

Hinge pin

⁵⁄₁₆" Hex-head hinge screw

6.Replace the upper access panel loosely on the ice maker.

7.Reverse the door endcaps as follows:

■Remove both the screws and endcaps (top and bottom).

■Move the top end cap diagonally to the opposite side's bottom corner, keeping the straight side of the end cap facing the front of the ice maker.

■Move the bottom end cap diagonally to the opposite side's top corner, keeping the straight side of the end cap facing the front of the ice maker.

8.Set the door aside.

Handle screw

End Cap screw

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

Remove door

1.Unplug ice maker or disconnect power.

2.Remove the handle screws and handle (on some models). Keep the parts together and set them aside.

3.Remove the two hex-head screws from the upper access panel. Lift up on the bottom of the access panel to release it from the front of the ice maker. Do not disconnect the wires.

4.With the upper access panel raised, remove the hinge pin from the top hinge.

5.Remove the door from the hinges and screw the top hinge pin back into the top hinge.

Reverse Hinges

1.Unscrew and remove the top hinge. Replace the screws in the empty hinge holes.

2.Remove the screws from the bottom of the opposite side of the ice maker cabinet. Turn the top hinge upside down so that the hinge pin points up. Place the hinge on the bottom opposite side of the ice maker and tighten screws.

3.Remove the plastic hinge pin sleeve from the “old” bottom hinge and replace it on the new bottom hinge pin.

4.Remove the “old” bottom hinge screws and hinge. Replace the screws in the empty hinge holes.

5.Remove the screws from the top of the opposite side of the ice maker cabinet. Turn the hinge upside down so that the hinge pin points down.

6.Raise the upper access panel and place the hinge on the top opposite side of the ice maker. Tighten the hinge screws.

7.Remove the top hinge pin.

Replace Door

1.Place plastic hinge pin sleeve in the top hinge hole on the door. Align the door with the top hinge hole and replace the top hinge pin.

2.Replace the upper access panel and secure it with the hex head screws.

3.Replace the handle and handle screws.

Top Hinge

A

B

C

D

A.Hinge pin

B.Hinge pin sleeve

C.Hinge

D.Hex-head hinge screw

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 2313786 ICE MakerTable of Contents ICE Maker SafetyLocation Requirements Installation InstructionsCleaning Before Use Unpack the Ice MakerConnect Water Supply Electrical RequirementsWater Supply Requirements LevelingRear View Connecting the water lineDrain Pump System on some models Connecting the DrainDrain Connection Gravity Drain SystemReplace Door Ice Maker DoorRemove door Reverse HingesIce Making Process Normal SoundsBottom Hinge Reverse Door CatchExterior Surfaces Using the ControlsCleaning ICE Maker CareInterior Components CondenserDirty or clogged condenser To shut down the ice maker Vacation and Moving CareIce Quality TroubleshootingPlumbing Problems Ice Maker OperationU.S.A Assistance or ServiceCanada Items Whirlpool will not PAY for ONE Year Limited WarrantyDisclaimer of Implied Warranties Limitation of Remedies Déballage de la machine à glaçons Instructions D’INSTALLATIONExigences demplacement Sécurité DE LA Machine À GlaçonsSpécifications de l’alimentation en eau Spécifications électriquesNivellement Raccordement du tuyau d’eau Raccordement de la canalisation d’eauOutils requis VUE Arrière Raccordement au conduit dévacuationVidange par gravité Système avec pompe de vidange sur certains modèlesOutillage Nécessaire Porte de la machine à glaçonsRaccordement du conduit dévacuation Dépose de la porteSons normaux Nettoyage Utilisation des commandesGlaçons Fonctionnement de la machine à glaçonsCondenseur Nettoyage du système de la machine à glaçonsUn condenseur sale ou bouché Vis de serrage Support de pelle à glace Nettoyage des composants intérieursLa machine à glaçons ne fonctionne pas DépannageOu déménagement Arrêt de la machine à glaçonsQualité des glaçons Production de glaçonsProblèmes de plomberie Pour plus d’assistance Assistance OU ServicePour service au Canada Si vous avez besoin de pièces de rechangeGarantie Limitée DE UN AN Garantie DES Gros Appareils Ménagers Whirlpool CorporationWhirlpool NE Prendra PAS EN Charge Whirlpool Corporation All rights reserved 2313786

W10136155B specifications

The Whirlpool W10136155B is a highly efficient refrigerator model designed to enhance food preservation while offering practical features that cater to modern living. This appliance stands out in the crowded marketplace, thanks to its user-friendly functionalities and innovative technologies aimed at maximizing convenience and freshness.

One of the key features of the W10136155B is its spacious interior, which allows for ample storage of groceries and essentials. It includes adjustable shelves that can be easily reconfigured to accommodate larger items, providing versatile storage options for various food sizes and shapes. Additionally, the refrigerator has bins and drawers designed specifically for fruits and vegetables, promoting optimal organization and easy access to fresh produce.

Energy efficiency is another hallmark of the Whirlpool W10136155B. This refrigerator is built with advanced insulation and energy-saving technologies that help reduce electricity consumption without compromising performance. This makes it an environmentally friendly choice, aligning with the growing consumer demand for sustainable appliances.

The refrigerator also features a frost-free design, which eliminates the need for manual defrosting. This not only saves time but also helps maintain a consistent internal temperature, ensuring that food stays fresh longer. The intuitive temperature control system further enhances this feature, allowing users to easily adjust settings to suit different types of food items.

Another notable characteristic of the W10136155B is its enhanced filtration system. The refrigerator integrates a water and ice dispenser equipped with a filtration setup that removes impurities, delivering clean and crisp drinking water and ice. This promotes healthier hydration practices and adds convenience for families on the go.

Furthermore, the Whirlpool W10136155B boasts sleek aesthetics with a modern finish that fits seamlessly into any kitchen decor. Its easy-to-clean surfaces and design ensure that maintenance is hassle-free, allowing users to spend more time enjoying their food and less time worrying about upkeep.

In conclusion, the Whirlpool W10136155B is a stellar refrigerator model that combines efficiency, modern technology, and practical features. Its spacious design, energy-efficient operation, advanced filtration system, and low-maintenance characteristics make it a standout choice for those seeking a reliable and stylish kitchen appliance. Whether for a busy family or an individual, this refrigerator offers a combination of functionality and convenience that caters to diverse lifestyle needs.
Top Page Image Contents