Whirlpool W10136155B manual Installation Instructions, Unpack the Ice Maker, Location Requirements

Page 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic

precautions:

■Plug into a grounded 3 prong outlet.

■Do not remove ground prong.

■Do not use an adapter.

■Do not use an extension cord.

■Disconnect power before cleaning.

■Disconnect power before servicing.

■Replace all parts and panels before operating.

■Use two or more people to move and install ice maker.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Unpack the Ice Maker

WARNING

Excessive Weight Hazard

Use two or more people to move and install ice maker. Failure to do so can result in back or other injury.

Removing Packaging Materials

Remove tape and glue from your ice maker before using.

■To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water

and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your ice maker.

Location Requirements

■To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The unit may be closed-in on the top and 3 sides, but the installation should allow the ice maker to be pulled forward for servicing if necessary.

■Installation of the ice maker requires a cold water supply inlet of ¹⁄₄" (6.35 mm) OD soft copper tubing with a shutoff valve and either a gravity-drain system or condensate pump to carry the water to an existing drain.

■Choose a well ventilated area with temperatures above 55°F (13°C) and below 100°F (38°C). Best results are obtained between 70°F (21°C) and 90°F (32°C).

■This unit must be installed in an area protected from the elements, such as wind, rain, water spray, or drip.

■When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown.

NOTE: Do not kink or pinch the power supply cord between the ice maker and cabinet.

Cleaning Before Use

After you remove all of the packaging materials, clean the inside of your ice maker before using it. See the cleaning instructions in the “Ice Maker Care” section.

 

 

 

 

 

 

 

 

 

 

111/2

"

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(29.2 cm)

 

 

 

34"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(86.4 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Min.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

281/2"

341/2"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(87.6 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(72.4 cm)

Max.

 

 

 

 

 

3 1/2 "

9"

 

 

 

 

 

 

 

 

 

 

(8.9 cm) (22.9 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

24"

(60.1 cm)

15"

(38.1 cm)

A. Recommended location for electrical and plumbing fixtures

B. Floor level

■You should choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If needed, you can adjust the height of the ice maker by changing the height of the leveling legs. See “Leveling.”

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 2313786 ICE MakerTable of Contents ICE Maker SafetyLocation Requirements Installation InstructionsCleaning Before Use Unpack the Ice MakerConnect Water Supply Electrical RequirementsWater Supply Requirements LevelingRear View Connecting the water lineDrain Pump System on some models Connecting the DrainDrain Connection Gravity Drain SystemReplace Door Ice Maker DoorRemove door Reverse HingesIce Making Process Normal SoundsBottom Hinge Reverse Door CatchExterior Surfaces Using the ControlsCleaning ICE Maker CareCondenser Interior ComponentsDirty or clogged condenser To shut down the ice maker Vacation and Moving CareIce Quality TroubleshootingPlumbing Problems Ice Maker OperationAssistance or Service U.S.ACanada ONE Year Limited Warranty Items Whirlpool will not PAY forDisclaimer of Implied Warranties Limitation of Remedies Déballage de la machine à glaçons Instructions D’INSTALLATIONExigences demplacement Sécurité DE LA Machine À GlaçonsSpécifications électriques Spécifications de l’alimentation en eauNivellement Raccordement de la canalisation d’eau Raccordement du tuyau d’eauOutils requis VUE Arrière Raccordement au conduit dévacuationVidange par gravité Système avec pompe de vidange sur certains modèlesOutillage Nécessaire Porte de la machine à glaçonsRaccordement du conduit dévacuation Dépose de la porteSons normaux Nettoyage Utilisation des commandesGlaçons Fonctionnement de la machine à glaçonsNettoyage du système de la machine à glaçons CondenseurUn condenseur sale ou bouché Vis de serrage Support de pelle à glace Nettoyage des composants intérieursLa machine à glaçons ne fonctionne pas DépannageOu déménagement Arrêt de la machine à glaçonsProduction de glaçons Qualité des glaçonsProblèmes de plomberie Pour plus d’assistance Assistance OU ServicePour service au Canada Si vous avez besoin de pièces de rechangeGarantie DES Gros Appareils Ménagers Whirlpool Corporation Garantie Limitée DE UN ANWhirlpool NE Prendra PAS EN Charge Whirlpool Corporation All rights reserved 2313786

W10136155B specifications

The Whirlpool W10136155B is a highly efficient refrigerator model designed to enhance food preservation while offering practical features that cater to modern living. This appliance stands out in the crowded marketplace, thanks to its user-friendly functionalities and innovative technologies aimed at maximizing convenience and freshness.

One of the key features of the W10136155B is its spacious interior, which allows for ample storage of groceries and essentials. It includes adjustable shelves that can be easily reconfigured to accommodate larger items, providing versatile storage options for various food sizes and shapes. Additionally, the refrigerator has bins and drawers designed specifically for fruits and vegetables, promoting optimal organization and easy access to fresh produce.

Energy efficiency is another hallmark of the Whirlpool W10136155B. This refrigerator is built with advanced insulation and energy-saving technologies that help reduce electricity consumption without compromising performance. This makes it an environmentally friendly choice, aligning with the growing consumer demand for sustainable appliances.

The refrigerator also features a frost-free design, which eliminates the need for manual defrosting. This not only saves time but also helps maintain a consistent internal temperature, ensuring that food stays fresh longer. The intuitive temperature control system further enhances this feature, allowing users to easily adjust settings to suit different types of food items.

Another notable characteristic of the W10136155B is its enhanced filtration system. The refrigerator integrates a water and ice dispenser equipped with a filtration setup that removes impurities, delivering clean and crisp drinking water and ice. This promotes healthier hydration practices and adds convenience for families on the go.

Furthermore, the Whirlpool W10136155B boasts sleek aesthetics with a modern finish that fits seamlessly into any kitchen decor. Its easy-to-clean surfaces and design ensure that maintenance is hassle-free, allowing users to spend more time enjoying their food and less time worrying about upkeep.

In conclusion, the Whirlpool W10136155B is a stellar refrigerator model that combines efficiency, modern technology, and practical features. Its spacious design, energy-efficient operation, advanced filtration system, and low-maintenance characteristics make it a standout choice for those seeking a reliable and stylish kitchen appliance. Whether for a busy family or an individual, this refrigerator offers a combination of functionality and convenience that caters to diverse lifestyle needs.
Top Page Image Contents