Whirlpool DU8903XL manual Starting your dishwasher, Selecting a cycle

Starting your dishwasher

1.Spin the Upper Spray Arm to make sure nothing will stop it from turning freely.

2.Close and latch the door.

3.Run hot water at sink nearest dish- washer until it is hot.

4.Push Cycle Selector Button for the de- sired cycle. (The dlshwasher will start to fill if the door is latched and the button is firmly pushed.)

5.Push Option Selector Button for de- sired option or options.

Selecting a cycle

POTS 6 PANS Cycle

Maximum cleaning for cooked- or baked-on foods. Timer delays while

the dishwasher automatically heats the water to 145’F (63°C) in both washes and the last rinse [marked ‘1. Cycle time will be about 1% to 2

hours, depending on time needed to heat water.

HEAVY WASH Cycle

A double wash for heavily soiled loads. Cycle time is about 70 minutes.

NORMAL WASH Cycle

CLEAN LIGHT

WASH LIGHT ON RINSE/DRY LIGHT ON

~@p$$j

WASH LIGHT ON RINSE/DRY LIGHT ON CLEAN LIGHT ON

WASH LIGHT ON RINSE/DRY LIGHT ON CLEAN LIGHT ON

For normal, everyday soiled loads. [The Energy Guide Label data is based on this cycle.) Cycle time is about 60 minutes.

LOW ENERGYWASH Cycle

For pre-rinsed or lightly soiled loads. Cycle time is about 55 minutes.

CHINA CRYSTAL Cycle

A light wash and gentle dry for china and crystal. Unless AIR DRY is selected, the heating element

cycles on and off during the “dry” part of the cycle. Cycle time is about 35 minutes.

RINSE 81HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.

Use AIR DRY only Do not use HI-TEMP WASHING Option.

WASH LIGHT ON RINSE/DRY LIGHT ON CLE;N UGH! ON

CLEAN LlGHl

WASH LIGHT ON RINSE/DRY LIGHT ON

WASH LIGHT ON CLEAN LIGHT ON