Safety Instructions

1.Read Instructions － All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions － The safety and operating instructions should be retained for future reference.

3.Heed Warnings－All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions －All operating and use instruc- tions should be followed.

5.Water and Moisture－The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6.Carts and Stands－The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved with care Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

7.Wall or Ceiling Mounting－The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation－The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat－The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10.Power Sources－The appliance should be con-nected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Grounding or Polarization －Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

12.Power-Cord Protection－Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, conve-nience

receptacles, and the point where they exit from the appliance.

13.Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

Clean by wiping with a cloth slightly damp with water. Avoid getting water inside the appliance.

14.Disconnect power cord before servicing.

15.Replace critical components only with factory partsor recommended equivalents.

16.For AC line powered units - Before returning repaired unit to user, use an ohmmeter to measure iron both AC plug bade to all exposed metallic parts. The resistance should be more than 100,000ohms.

17.Nonuse Periods－The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

18.Object and Liquid Entry－Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

19.Damage Requiring Service－The appliance should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in perfor-mance; or

E.The appliance has been dropped, or the enclose- sure damaged.

20.Servicing－The user should not attempt to service the appliance beyond that described in the opera-ting instructions. All other servicing should be referred to qualified service personnel.

21.Ventilation – The appliance should be situated so that ist location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

22.Cleaning – The appliance should be cleaned only as recommended by the manufacturer.

23.Nonuse Periods – The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

S-700 specifications

The Stanton S-700 is a professional-grade turntable that stands out in the world of DJ equipment, known for its robust design and high-quality performance. Designed for both aspiring and seasoned DJs, the S-700 embodies a blend of traditional vinyl playback alongside modern technological innovations, making it a sought-after choice among music enthusiasts.

One of the most notable features of the Stanton S-700 is its direct drive motor system, which delivers exceptional torque and quick start-up times, ensuring that users can execute scratches and transitions seamlessly. This is especially important for live performances where precision and timing are crucial. The turntable also boasts a 33/45 RPM speed selection, providing versatility for various vinyl records.

The S-700 is equipped with an adjustable tonearm that offers precision tracking and stability. This feature allows for accurate reproduction of sound and minimizes wear on records, which is vital for any DJ looking to maintain their vinyl collection. Moreover, the S-700's anti-skating mechanism helps ensure that the needle remains centered in the groove, enhancing audio fidelity and preventing distortion.

Another highlight of the Stanton S-700 is its built-in phono preamp, which allows for easy connection to a variety of audio systems without the need for an external preamp. This feature simplifies setup and allows DJs to focus more on their performance rather than technicalities. The turntable also includes RCA output connections, enabling users to connect to mixers, speakers, and other sound equipment effortlessly.

The construction of the Stanton S-700 is rugged yet stylish, featuring a sleek design with a sturdy chassis that minimizes vibrations, thereby preserving sound quality. The large, slipmatted platter provides excellent control, especially during cueing and scratching maneuvers.

In addition to its performance features, the Stanton S-700 supports USB connectivity, allowing users to digitize their vinyl collections easily. This capability caters to the growing trend of mixing traditional audio formats with digital music, enabling DJs to create unique soundscapes and remixes.

In summary, the Stanton S-700 is a turntable that combines durability, precision, and technological innovation, making it a formidable tool for any DJ. Its range of features—from the direct drive motor to USB connectivity—ensures that it meets the demands of modern music mixing while honoring the art of vinyl playback. Whether in a club setting or a personal studio, the S-700 delivers an exceptional audio experience.